Для работы на объектах по обустройству газовых месторождений приглашаются инспекторы по электрике и КИПиА. Требования: - Муж., 27 до 55 лет; - Образование высшее/среднее специальное (техническое); - Наличие действующих квалификационных удостоверение по электробезопасности, ВИК, ПБ, ОТ, ПТМ; - Опыт работы по электрике и КИПиА не менее 5 лет; - Опыт работы инспектором авторского или технического надзора обязательно! Обязанности: - Проверка по чертежам монтажных работ, выполняемых Подрядчиком; - Контроль проведения испытаний; - Контроль за выполнением строительства и монтажа Электро Химической Защиты и Высоковольтной Линии; - Проверка исполнительной и разрешительной документации Подрядчика; - Проверка сертификатов качества, на используемые при строительстве материалы требованиям проекта и нормативной документации РФ; - Подписание первичных актов на выполненные работы, проверка «Журнала учета выполненных работ» КС-6а, подтверждение выполнения Подрядчиком физических объемов строительства, Актов скрытых работ. Условия: - Достойный уровень заработной платы; - Оплата проезда, проживания, питания; - Вахтовый метод работы - Длительный срок проекта. Для ускорения обработки Вашего резюме указывайте, пожалуйста, название вакансии в теме письма.
Требуются кадры с опытом работы не менее 2-3 лет в области интерпретации материалов ГИС при контроле за разработкой нефтяных и газовых месторождений. Заработная плата от 30 000, формируется по результатам собеседования.
― Требования к работнику: * Возраст от 25 лет. * среднее и выше * опыт работы желателен область аттестации - Газонефтепродуктопроводы, Резервуары для нефти и нефтепродуктов. так же является преимуществом наличие удостоверений по ВИК и, соответсвенно, умение проводить ВИК. ― Условия: * Социальный пакет. * Официальное оформление. * Белая зарплата. (13 зп присутсвует) проезд к месту работы на вахтовом автобусе. Ехать недолго))
― Зарплата: Оклад 15 000- 17000 рублей.
― Контакты: резюме скидывать на defectoskoprabota@rambler.ru.
В московскую строительную компанию приглашается инженер ОТ и ТБ с опытом работы от 2-х лет, проживающий в Москве. Желателен опыт работы в строительстве объектов нефтегазовой отрасли.
Основные задачи:
1. Организация и координация работы по охране труда на предприятии. 2. Контроль за соблюдением законодательных и иных нормативных правовых актов по охране труда работниками предприятия. Составление отчетности по охране труда по установленным формам и в соответствующие сроки. 3. Совершенствование профилактической работы по предупреждению производственного травматизма, профессиональных и производственно-обусловленных заболеваний и улучшению условий труда. 4. Консультирование персонала по вопросам охраны труда. 5. Промбезопасность.
Заработная плата 100 000 руб. Адрес для резюме: metrology2012@yandex.ru
ОАО «Тарко-Салинской нефтегазоразведочной экспедиции по испытанию скважин» (многофункциальное сервисное предприятие с 25-летним опытом работы в ЯНАО,принимавшее участие в открытии 11 месторождений и 74 залежей) требуется повар в полевую бригаду. Требования:Профильное образование. Опыт работы.Работа с технологическими картами.Ценообразование.Составление меню.
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position will be based in Russia. The Field Electrical Engineer will be involved in a major Oil & Gas operator’s project.
Activities:
• Review and digest the detail Design. • Verify the deliverables to be produced to or by Contractors related to Electrical • Coordinate and supervise electrical studies for central process facilities, associated drilling pads, overhead lines and cables pulling; • Check that the design is developed in line with the Pre-Project and the Statement of Requirements. • Ensure coordination of electrical activities with the other Specialists within the project team. • Ensure global consistency of the design. • Follow-up contractors activities. • Control and comment all Electrical documentation issued by contractors related to engineering, procurement, project management, fabrication and tests, and check that they are as per Company specifications and rules. • Participate to internal and external interface meetings. • Participate in weekly and monthly progress Meetings. • Provide input to the Field project Engineering for electrical progress reporting (data, narrative …), highlight critical problems and propose corrective actions; • Ensure and liaise with his field project engineer and design author ship
Context and environment:
• Rotation, 4x4
Qualifications and Experience required:
Graduate engineer with minimum 7 years experience in the industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Russia. QA/QC Site Manager will be involved in a major Oil & Gas operator’s project.
Activities:
• Participate, as part of the Project Quality Management System (QMS), in the development of site quality management system (e.g., plans, procedures and guidelines). • Participate in review of key reference documentation for construction (e.g. Specifications) to verify compliance with the Project quality requirements. • Supervise the activities of assigned personnel and Site Contractor. Perform supervisory functions and exercise technical & financial authority at the level established for the position. • Manage the Site Quality Control Team, including the Welding Engineer, Insulating & Coating Engineer and remaining Inspectors and in particular, ensure, for any material or equipment to be incorporated into the Facilities, and for any work performed on Site, that: • Ensure that the Contractor’s Quality assurance and control procedures are complient with Project requirements. • The Contractor’s Site quality assurance record books and all the related documentation are maintained and updated in conformity with contractual requirements and the Project quality assurance plan and procedures. • Report on quality matters for Site processes and activities to the Site Construction Manager, also liaise closely with the Project Quality Manager to ensure that the management team is fully abreast of any quality issues and areas of concern. • Develop and maintain a Data Base for quality assurance and control activities at site. Develop and maintain Performance Indicators and prepare daily and weekly reports, and write the corresponding narratives. • Develop the program for Site quality assurance and controls of Contractor’s Works and coordinate its implementation. • Ensure the Site Contractor (Suppliers and Sub-Contractors also) develop and implement QA/QC systems corresponding with the Contract requirements. • Review critical documentation produced by Contractor (e.g., Inspection and Test Plans, Method Statements), and advise on “fitness for purpose” including Site Surveillance Schedule and/or compliance audits. • Conduct visits, surveillance activities and/or audits at the Site Works as per schedule or, as and when required. • Participate in the review of Site deviations related to quality issues and provide recommendations on the matter. • Coordinate the review of Site Non-Conformance Reports, advise on corrective actions and maintain the Project Register. • Monitor progress of the Site Contractor (and its Subcontractors) to make sure test packs are released on time and within the required priorities in respect of the Commissioning and Start Up schedule. • Review final documentation produced by Contractor and advise accordingly. • Support the Construction Team and propose alternative courses of action, wherever possible, to facilitate efficient project progress. Participate in regular meetings to keep abreast with all issues relating to the Project. Discuss and review opportunities for the optimization of assigned work programmes.
Context and environment:
• Rotation 4x4
Qualifications and Experience required:
Graduate engineer with minimum 12 years experience in the oil and gas industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Moscow, Russia. Piping and Layout Engineer will be involved in a major Oil & Gas EPC’s project.
Activities:
• A - Development Technology know how and Commercial support • B - FeasibilityC - Bidding phase / Commercial proposal development • Bill of material; • Plot plan lay out proposal; • Support lead to define man hour and cost estimate. • D - Project Execution • Ensurethe Piping and Layout engineering support to different projects; • Ensure the achievement of assigned goals and the fulfilment of project quality requirements and contractual obligations; • Analyse technical documents (e.g. specifications, calculation notes, drawings) to assess the scope of the studies required and the potential risks; • Seek solutions which can bring overall savings to the project; • Estimate quantities or validate estimation done by other specialist of the team; • Check all produced documents (internal or subcontracted) like design reports, technical specifications, drawings under his responsibility; • Write the Piping and Layout methodologies / Design Premises comprehensive of all necessary data, general and specific design guidelines; • Analyse project technical documents to validate consistency between the budget, resources and means allocated for the work completion and the targets to be met; • Organize the work of the team under his responsibility; • Define and follow-up the planning of resources mobilization; • Monitor and report actual progress including 3D / check for Discipline activities, including control of men-hours and delivered documents; • Attend to internal review activities and inter-discipline check meetings; • Provide technical support to Procurement, Subcontracting and Construction activities included in the scope of work; • Supervise the writing of specifications and requisitions as well as technical bid evaluations; • Inform on a permanent basis the Project Piping and Layout leader of any foreseen technical or financial or delay risk; • Feed the Piping and Layout Department improvement system by reverting the lessons learned during the project • E - Construction and start up • Participate to test circuit verification; • Field engineering during construction activities; • Assist, when necessary, engineering adjustment on site; • Material management at site.
Context and environment:
• Resident
Qualifications and Experience required:
Graduate engineer with minimum 10 years experience in the oil and gas industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
ОАО «Тарко-Салинской нефтегазоразведочной экспедиции по испытанию скважин» (многофункциальное сервисное предприятие с 25-летним опытом работы в ЯНАО,принимавшее участие в открытии 11 месторождений и 74 залежей) требуется мастер КРС Руководство бригадой при испытании, освоении и капитальном ремонте скважин
ОАО «Тарко-Салинской нефтегазоразведочной экспедиции по испытанию скважин» (многофункциальное сервисное предприятие с 22-летним опытом работы в ЯНАО,принимавшее участие в открытии 11 месторождений и 74 залежей) требуется ведущий технолог по испытанию, освоению и капитальному ремонту скважин.
Обязанности: Управление технологическими процессами при испытании, освоении и капитальном ремонте скважин: установка цементных мостов, проведение кислотных обработок, аварийные работы, монтаж устьевого оборудования, бурение боковых стволов, освоение и испытание скважин.
Требования: Высшее профильное образование. Опыт работы.Достойная заработная плата по результатам собеседования
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Moscow, Russia. The Rotating Equipment Engineer will be involved in a major Oil & Gas operator’s project.
Activities:
• Follow Up and Verify all documentations proposed by the Contractor. • Manage external parties that include design institutes, contractors and vendors to ensure that the project development are carried out in the safe manner within the project schedule and budget. Establish, review and approve quality assurance and control procedure. • Oversee all responsible teams activities to ensure that all technical, contractual and cost information are properly recorded, collated and available for inspection/reference as required by law, regulations and company policies. • Liaise with Operations to develop and implement projects in line with current Operation and Maintenance philosophy. • Manage construction (all) interfaces with others: Engineering, other sub-projects, contractors, operations etc ... • Provide necessary input and participate in clarifications, negotiations etc ... with site and Contractors to assure project development. • Define and propose particular assistance, review, and third party. • Work closely with Procurement Vendor Qualification Departments (Vendors, Technical Evaluation, and Purchasing control). • Technical support on all the problems in other related departments. • Ensure the storing and confidentiality of the documentation. • Participates in meeting related to the area of responsibility. • Anticipate potential problems. Analyse and propose corrective actions. • Contribute to audits of Contractors or Sub-Contractors in co-operation with the QA/QC department. • Make necessary arbitration between different disciplines, the only criteria being the benefit of the overall project. • Participate to regular site coordination meetings to report activities of Construction Contractors. • Liaise and support Vendor / Contractor representative for site survey and work visits. • Maintain good relationships with Contractors, being flexible enough but also strict when necessary to achieve the objectives of the Project.
Context and environment:
• Resident, Moscow
Qualifications and Experience required:
Graduate engineer with minimum 12 years experience in the oil and gas industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
Dear Subscribers,
We are looking for professional and experienced ( more than 10 years) simultaneous translators (ENG/RUS) for short-term freelance project in May 2013.
please send your detailed CV with list and dates of international participations: international forums, seminars, international meetings , sessions, conferences.
please also provide recommendations.
Thanks for co-operation,
Akmaral Taganbayeva
Head of Recruitment Dept.
RTG Tilmazh Kazakhstan LLP
Atyrau,8 A Azattyk avenue,
Miras Building, 2nd Floor, Office #1
Tel: +7 7122 99-62-32, 99-60-23
recruiter@rtg-group.kz
Основная функциональная задача: обеспечивать продажи и развитие продуктов в рамках проекта.
Обязанности для руководителя проекта 3 категории: • сопровождать существующих Заказчиков в рамках проекта, • выполнять План продаж по проекту, • составлять совместно с техническими специалистами и анализировать Технические задания на новые изделия, сопровождать разработку и изготовление продукции в рамках проекта, • участвовать в подготовке тендеров, • готовить коммерческие предложения, презентации для переговоров, • сопровождать переговоры Руководителя направления, • вести и своевременно предоставлять необходимую отчетность.
Обязанности для руководителя проекта 2 категории: • сопровождать существующих и находить новых Заказчиков в рамках проекта, устанавливать и развивать новые связи, • разрабатывать и выполнять План продаж по проекту, формировать продуктовую, рекламную политику в рамках проекта, • сопровождать переговоры Руководителя направления с ключевыми клиентами, • организовывать подготовку и проведение тендеров, • составлять совместно с техническими специалистами и анализировать Технические задания на новые изделия, • сопровождать разработку, постановку на производство, первые внедрения, сертификацию продукта, • вести и своевременно предоставлять необходимую отчетность.
Требования: • возраст от 26-45 лет; • пол – мужской; • возможность переезда в Московскую область (Запрудня, Дубна, Талдом, Дмитров), • высшее электротехническое образование, • хороший технический кругозор; • опыт работы в нефтедобывающих, электротехнических компаниях (желательно отечественных); • знание рынка электротехнического оборудования, • желательно наличие связей на рынке погружного оборудования; • возможность много ездить по стране и в ближнее зарубежье; • подходящие личные качества: ориентация на результат, ответственность, целеустремлённость, системность, стремление к инновациям, дисциплинированность.
Условия: • официальное трудоустройство, согласно ТК РФ; • длительность испытательного срока - 3 месяца. Во время испытательного срока - программа адаптации к должности; • размер оплаты оговаривается на собеседовании, зависит от опыта и сложности выполняемых задач: для 3-й категории – 100 тыс. руб. 2-й – 150 тыс. руб.; • на период испытательного срока устанавливается 80% от утвержденного оклада. • предусмотрена система бонусов и премий, • основное место работы – Запрудня (МО), 2-3 дня в неделю – стажировка в Москве (м. Сокол).
Работа на проекте КТК в Атырау. Высшее техническое образование. Знание СНИПов ГОСТов международных. Опыт работы от 8 лет в т.ч. в международных проектах. График работы и заработная плата обсуждается при собеседовании.
Должностные обязанности: - участие в разработке производственной программы предприятия, графиков кап. ремонта скважин, программы добычи углеводородного сырья и т.п.; - расчет потребности в приобретении нефтепромыслового оборудования, техники, материалов и инструмента, необходимых для выполнения производственных программ подразделений компании, участие во входном контроле; - подготовка технических заданий при проектировании, разработка проектных решений и согласование проектов в контролирующих органах; - работа с проектными организациями по разработке проектов и участие в постоянном техническом надзоре в процессе проектирования и технологического контроля в ходе строительства; - проведение диагностики, испытания, освидетельствования сооружений и технических устройств. - разработка мероприятий ГТМ, ОТМ, - формирование годового бюджета, расчет капитальных и текущих затрат; - производство отчетов УЭЦН и трубопроводов; - анализ работы погружного оборудования; - работа с подрядными организациями, оказывающими услуги по обслуживанию, прокату и ремонту электро-погружных установок; - составление технологических регламентов. Возраст: от 28 до 40 лет; Образование: высшее профессиональное, Профессиональные навыки: стаж работы по специальности не менее 5 лет, на инженерно-технических и руководящих должностях по профилю деятельности, связанной с добычей углеводородного сырья, разработкой нефтяных и газовых месторождений, работа в программе PowerPoint Заработная плата на руки 78 000 рублей
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position will be based in Moscow, Russia. The Process Engineer will be involved in a major Oil & Gas operator’s project.
Activities: • Review and digest the pre-project studies. Verify the basis of design • Participate to the endorsement of the Pre-project dossier by the FEED contractor. Verify the deliverables to be produced for Process • Coordinate and supervise Process studies for the Central Processing Facilities, storage, water injection facilities …, associated drilling Pads and flow lines, oil & gas export facilities and pipes … • Check that the design is developed in line with the Pre-Project and the Statement of Requirements • Ensure coordination of Process activities with the other Specialists within the project team. Ensure global consistency of the design • Control and comment the documents issued by contractor(s) and check that they are as per Company specifications and rules. Review and answer to the Engineering Queries and Requests For Waiver • Call for and participate to necessary technical and/or co-ordination meetings required to achieve the performance of the work • Follow-up Contractor(s) activities • Participate to Technical Reviews/Audits (HAZID, HAZOP, PTR …). Ensure follow-up and implementation • Liaise with the operating team to collect necessary data for the project • Participate to the Tender Packages, Technical Evaluation, Recommendation To Award … for the EPC and LLI’s Contractor’s selection • Manage technical interfaces related to Process between EPC Contracts, LLI’s … • Participate to site visits as necessary • Participate in weekly and monthly progress meetings • Provide input to the Engineering Manager for Project progress reporting (data, narrative …), outlines critical problems and proposes corrective actions Context and environment:
• Resident
Qualifications and Experience required:
Graduate engineer with minimum 10 years experience as in the oil industry of which 5 spent in a lead Process position (upstream). Fluent Russian is mandatory Fluent in English (speaking and writing). Good communication skills, able to work in a multicultural environment.
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Moscow, Russia. The Contract engineer will be involved in a major Oil & Gas operator’s project.
Activities:
• Supervise ITT preparation. • Participate in preparation of Tender Documentation and issue of CFT with Project team. • Responsible for filing and maintaining of all contractual documentation • Responsible to maintain portfolio of contracts / procurement information • Participate in clarification and negotiation meetings with major international Contractors. • Supervise contractual freeze. • Manage contracts with selected Contractors and verify that all required approval collected. • Work in collaboration with Technical and Corporate personnel • Responsible for coordination of pre-qualification and bidders list composition, issue of Invitation to Tender, clarifications, commercial evaluation. • Responsible for the preparation of Tender Board presentations • Responsible for the preparation, authorization and release of contracts and Purchase Orders • Responsible for correct Contract and Purchase Order composition and approval routing cycle completion. • Responsible for the delivery of contract and purchase order documentation to the vendor, receipt of signed originals and filing in accordance with archiving procedures • Responsible for portfolio progress reporting and contract closeout • Supervise CFT process. • Review and comment on contractual exceptions and qualifications.
Context and environment:
• Resident
Qualifications and Experience required:
Graduate engineer with minimum 10 years experience in the oil and gas industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Russia. The Deputy Commissioning Manager will be involved in a major Oil & Gas EPC’s project.
Activities:
• Direct the development and implementation of a comprehensive Execution Plan for the pre-commissioning, commissioning, start-up of the plant; • Determine the organizational requirements and manpower to meet the objectives for the project; • Provide and direct pre-commissioning, commissioning and start-up input to Engineering during design phase; • Ensure that all commissioning activities are performed in accordance with the contractual requirements, HSE rules, allocated budgets, contractual schedule etc; • Interface with HSE group, Construction group, Client and all local agencies about all necessary issues related with commissioning.
Context and environment:
• Resident
Qualifications and Experience required:
Graduate engineer with minimum 17 years experience in the oil and gas industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Russia. The ICSS/Instrumentation Superintendent will be involved in a major Oil & Gas operator’s project.
Activities:
• Define, mobilize and manage an organization will cover all ICSS/Instrumentation activities on site; • Encourage and promote company’s values through the team members; • Maintain good motivation and moral within integration construction team; • Ensure that all members of the team are aware that in addition to quality and good engineering practice, planning, meeting deadlines and cost must be a permanent concern. • Follow up, review, comment on all documentations produced by contractors; • Verify that the Contractor(s) are administrating properly the Company Long Lead Items; • Plan, manage, control and deliver the overall ICSS/Instrumentation works at Central Process Facilities and remote pads; • Manage technical interfaces related to ICSS/Instrumentation between EPCC Contracts, LLI’s; • Liaise with Operations to develop and implement projects in line with current Operation and Maintenance philosophy; • Oversee all responsible teams activities to ensure that all technical, contractual and cost information are properly recorded, collated and available for inspection/reference as required by law, regulations and company policies; • Manage external parties that include design institutes, contractors and vendors to ensure that the project development associated with CPF up-grade and remote well pads integration activities are carried out in the safe manner within the project schedule and budget; • Anticipate potential problems. Analyse and propose corrective actions; • Provide input and review quality assurance and control procedure; • Liaise closely and ensure coordination with other work packages Superintendents, to ensure complete and timely hand-over of CPF and remote pads construction scopes to commissioning; • Make necessary arbitration between different work packages and disciplines, the only criteria being the benefit of the overall project; • Define and manage a strategy to minimize shutdowns; • Assist or issue in due time all reporting (daily, weekly, monthly, final report); • Participates in meeting related to the area of responsibility; • Provide support/participate to pre-commissioning & commissioning activities related to ICSS/Instrumentation part.
Context and environment:
• Rotation 28d/28d
Qualifications and Experience required:
Graduate engineer with minimum 8 years experience in the oil and gas industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
Обязанности: • Расчет текущих и перспективных планов производства нефтепродуктов по четырем направлениям: текущее планирование, бизнес-планирование, инвестиционное планирование, перспективное планирование • Планирование производства до технологических установок и технологических потоков • Подготовка данных по производственным показателям, касающихся производственных планов, сформированных в моделях PIMS, подготовка отчетов и анализ полученных результатов.
Требования: • Высшее образование (технология нефтепереработки) • Опытный пользователь программы ASPEN-PIMS • Знание процессов и технологии нефтепереработки • Знание MS Office: Word, Excel, PowerPoint • Желательно знание основ экономического анализа и прогнозирования
Условия: • Оформление в соответствии с ТК • Добровольное медицинское страхование • График работы с 08:00-17:00 • Место работы р-н Капотня, г. Москва
СНГС требуется НАЛАДЧИК КИПиА для работы на СПГ п. Пригородное , юг Сахалина. Требования: опыт работы в нефтегазовой отрасли, experience with Yokogawa, Rosemount. Резюме на эл. ад с темой НАЛАДЧИК КИПиА
СНГС требуется инженер по вращающемуся оборудованию (проведение вибромониторинга и контроля вибрации) для работы на СПГ. Требования: опыт работы (проведение вибромониторинга, сертификат невада), ВО. Резюме на эл. адрес с темой инженер по вращающемуся оборуд.
В сервисную компанию ООО "НефтеХимПромПоволжье" в связи с расширением штата требуется Инженер ПТО. Основные обязанности: -Подготовка отчетной документации по выполненным работам; -Подсчет объемов выполненных работ -Анализ выполненных работ; -Контроль за расходом и списание материалов; -Подготовка тендерной документации (оформление конкурсных заявок, мониторинг сайтов) -Подбор и нализ работы оборудования
Место работы: г. Самара, работа в офисе+коммандировки
Требования: -Высшее образование по нефтегазовому профилю. -Знание основ добычи и транспорта нефти, ТКРС, методов ПНП -Возраст не регламентирован -Опыт работы в должности инженера ПТО приветствуется -Наличие прав категория В, наличие собственного автомобиля приветствуется
Резюме отправлять на электронный адрес с обязательным указанием вакансии в теме сообщения office@nhpp.su
Должностные обязанности: - контроль выполнения испытаний с соблюдением требований НД и ТБ (проверка ВЛК), системы менеджмента качества в лаборатории; - обеспечение бесперебойной работы лабораторного оборудования, приборов; - контроль за наличием, хранением, использованием расходных материалов, хим. реактивов, химической посуды; - разработка инструкций и методического материала; - обучение практическим навыкам вновь принятых сотрудников по определению, контролю физико-химических свойств нефти, нефтепродуктов, технологической воды, ведение производственной документации Образование: высшее химическое, химико-технологическое Профессиональные навыки: титрометрические, потенциометрические, гравиметрические, хроматографические, физико-химические методы проведения испытаний. Опыт работы в испытательной химической лаборатории по определению показателей качества нефти, нефтепродуктов (желательно) Деловые и личностные характеристики: ответственность, исполнительность, дисциплинированность, умение работать в коллективе Работа вахтой месяц через месяц Заработная плата от 90 000 рублей за вахту Резюме направлять по адресу leonova_om@irkutskoil.ru
Должностные обязанности: - контроль за выполнением работ по бурению нефтяных и газовых скважин; - ведение необходимой документации в соответствии с утвержденным перечнем, представление оперативной отчетности (отчеты за сутки и промежуточный за время своей на объекты), составление отчета по законченной бурением скважине; - контроль расходования и качества технологических материалов для бурения скважины, анализ расходования материалов. Образование: высшее Дополнительное образование: курсы управления скважиной при YUDG Профессиональные навыки: опыт работы в бурении нефтяных и газовых скважин не менее 10 лет; хорошее знание ПК и специализированных программ Деловые и личностные качества: ответственность, целеустремленность, способность оперативно принимать решения и брать на себя ответственность, умение работать в команде. Работа вахтой месяц через месяц Заработная плата от 42 000 рублей за вахту Резюме направлять по адресу leonova_om@irkutskoil.ru
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Russia, Kaluga region. Permitting & Regulatory Engineer will be involved in a construction project.
Activities:
• Checking of technical documents (following requirements of the company, of RTN, other required parties) • Coordination of works on industrial safety/certification with Expertise companies/certification bodies/etc • Involvement in certification/expertise process from technical point of view • Working in industrial safety sphere/permitting for new facilities/object.
Context and environment:
• Rotation 11w/2w
Qualifications and Experience required:
Higher technical education (last year students is also OK) Knowledge of industrial safety (FZ-116, FZ-99, Order 545, ect. Knowledge of ESKD system of Russian Federation (ЕСКД) Knowledge of GOST's, PB (ПБ), etc Good in English (speaking and writing) Fluent Russian is mandatory. Knowledge of certification systems/RTN permitting process Good communication skills, able to work in a multicultural environment. Specialization/experience in cement industry is a plus Experience in commissioning in Russia is a plus
«АТЭК-СТРОЙ» приглашает на работу Начальника строительного участка на Юрубчено-Тохомское месторождение. самое крупное в регионе после „Ванкора“ Крупные нефтяные компании планируют добывать здесь до 10 миллионов тонн сырья. Если Вы имеете опыт работы от 2-х лет в должности Начальника строительного участка, знаете, как управлять подчиненными так, чтобы достигать поставленных целей, умеете работать со строительной и проектно- сметной документацией, знаете КОМПАС или AutoCad — то Вы смело можете претендовать на эту должность. Ваша задача — обеспечить бесперебойную работу на участке, сдать объект в срок, согласно договору, обеспечить качественное выполнение работ, обеспечить соблюдение требований дисциплины на объекте. Работая в „АТЭК-СТРОЙ“ Вы получите: 1. Стабильный, высокий уровень заработка (готовы обсуждать индивидуально) 2. Возможность профессионального развития и карьерного роста. 3. Опыт работы с крупнейшими представителями нефтегазовой промышленности России. 4. Работу в команде профессионалов Работа вахтовым методом. «АТЭК-СТРОЙ» — это сплав надежности, знаний и опыта.
«АТЭК-СТРОЙ» приглашает на работу Мастера строительно-монтажного участка на Ванкорское нефтегазовое месторождение — крупнейшее из месторождений, открытых и введенных в эксплуатацию в России за последние 25 лет. Если Вы имеете опыт работы от 2-х лет в должности мастера строительно-монтажных, сварочных работ, если умеете управлять подчиненными, а так же прошли сертификацию НАКС — то Вы смело можете претендовать на эту должность. Ваша задача — обеспечить качественное выполнение работ на участке в установленные сроки, а так же обеспечить соблюдение трудовой дисциплины Вашими подчиненными. Работая в „АТЭК-СТРОЙ“ Вы получите: 1. Стабильный, высокий уровень заработка, от 100 000 и более за вахту 2. Возможность профессионального развития и карьерного роста. 3. Опыт работы с крупнейшими представителями нефтегазовой промышленности России. 4. Работу в команде профессионалов Работа вахтовым методом. «АТЭК-СТРОЙ» — это сплав надежности, знаний и опыта.
Для работы вахтовым методом в Якутии требуются взрывники (открытые горные работы) Вахта 30/30 Заработная плата от 88000 до 106000 рублей в месяц Компания оплачивает проезд,проживание и питание Требуются взрывники,имеющие ЕКВ,опыт работы
Для работы вахтовым методом в Якутии требуется главный инженер участка БВР.Работа на крупном угледобывающем предприятии. Вахта 30/30 Компания оплачивает проезд,проживание и питание Требуется специалист с высшим горным образованием,БВР,опытом работы Заработная плата 106000 рублей в месяц
Обязанности: • Главный инженер проектов, Инженер-технолог • Организация работ по выполнению ПИР, • Подготовка технических заданий на ПИР, контроль за работой ПИР • Определение и анализ применяемых технологических решений • Подготовка и согласование графиков проектирования • Обоснование и принятие технических и проектных решений на стадии проектирования и строительства • Согласование внесения изменений в проектную документацию • Работа по организации и сопровождению прохождения экспертиз проектной документаций • Выполнение технических расчетов • Выполнение чертежей технологической обвязки оборудования, разработка технологических схем
Требования: • Знание основы проектирования и конструирования технологических комплексов • Обязательное знание нормативной документации в данной сфере, основ техники безопасности. • Образование: Высшее • От 30 до 45 лет • Не менее 3 лет в должности ГИПа, желательно проектирование объектов обустройства нефтегазовых месторождений, нефтегазохимия • Компетентность, оперативное решение поставленных задач, инициативность • Полная занятость, полный день Уровень зарплаты - достойный
Нужен химик технолог, специалист по приготовлению товарного бензина с помощью присадок. С опытом работы. Зп договорная, работа вахтовым методом. Дорога оплачивается. Свои резюме и вопросы присылать на kmv@pzcm.com
Нефтедобывающая компания ООО "Таймура" ищет специалистов по работе с АДПН/ППУА. Метод работы - вахтовый ( месяц через месяц) Работа на севере Красноярского края. Нанимаем специалистов из любых регионов. Дорога оплачивается. Свои резюме и дополнительные вопросы присылать на адрес электронной почты kmv@pzcm.com
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Moscow, Russia. Packages Specialist Lead will be involved in a major Oil & Gas EPC’s project.
Activities:
• A-Development of Technology know how and Commercial support • B-Feasibility • Provide technical support to other Project positions for specialist aspects • C-Bidding phase/Commercial proposal • Analyse and understand Tender documentation; • Define Discipline list of activities and deliverables and coordinate activities in accordance with Project schedule; • Identify technical queries, deviations and alternatives to be submitted; • Implement bidding methodologies, design criterias and guidelines; • Support the Proposal Manager during technical clarification meetings with the Client. • D-Project Execution • Ensure the achievement of the assigned goal and the fulfillment of the Project quality and contractual requirements; • Define list of activities and deliverables, setup time schedule, coordinate activities in accordance with contractual requirements; • Ensure Discipline Project progress, monitor and control manhour consumption; • Prepare technical annexes for engineering activities to be subcontracted; • Ensure subcontractor coordination and monitoring/reporting to PM of the Discipline budget costs; • Ensure proper Discipline workflow, interfaces, quality checks and approval of all Discipline Project documents, including Vendor ones; • Track and report to TM Discipline scope of work changes updating manhour and cost estimates; • Provide technical support to Project functions including Procurement and Construction; • Support PM in technical interfacing with the Client (according to TM); • Define and issue Purchase Requisitions; • Manage Vendor inspection test plan approval and support post order activities. • E-Construction and start up • Support the construction team in implementing the engineering solutions at site.
Context and environment:
• Resident
Qualifications and Experience required:
Graduate engineer with minimum 15 years experience in the oil and gas industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
We are currently looking for a Maintenance Supervisor for one of our major clients. The position is a contract hire with rotational cycle. The position is based in Black Sea, Ukraine. Minimum of 5 years' experience in offshore drilling rig Candidates must be able to speak English and or a European language. Candidate should have experience on NOV (Amphion) software.. Candidate should have experience on a Cyber Jack-up rig. CANDIDATES MUST BE ABLE TO SPEAK RUSSIAN AND ENGLISH Maximum 10 years' experience Must have a valid BOSIET Must have a valid Fit to Work or UKOOA certificate Must have a valid Police Clearance Minimum of 2+ years' experience in Offshore Jack up Drilling Rig Candidate should have experience in Cyber controls, NOV (Amphion) system Candidate must have experience onboard a B-Class jack-up rig Candidate must be well conversant in English. (Applications will only be considered from people who are authorized to work in this location by being a national of that country or region, or by holding a valid work permit.)
The position is a contract hire with rotational cycle. This position is in Black Sea, Ukraine. Oversee periodic inspection and lubrication of draw works, top-drive, pipe handling machines, swivel, etc. ensure crew follows planned lubrication schedule. Have crew inspect equipment for wear, leaks, etc. Ensure crew is aware of and adheres to all regulatory requirement and stress safe working practices. Complete IADC drilling reports, maintain pipe tally, record tour data, maintain BHA work sheets, make notes on drilling recorder, kill sheets, hole fill records, and trip sheets. CANDIDATES MUST BE ABLE TO SPEAK RUSSIAN AND ENGLISH Maximum 10 years' experience Must have a valid IWCF Must have a valid BOSIET Must have a valid Fit to Work or UKOOA certificate Must have a valid Police Clearance Minimum of 2+ years' experience in Offshore Jack up Drilling Rig Candidate should have experience in Cyber controls and NOV (Amphion) system Candidate must have experience onboard a B-Class jack-up rig Candidate must be well conversant in English. UKRAINE (Applications will only be considered from people who are authorized to work in this location by being a national of that country or region, or by holding a valid work permit)
We are currently looking for 2 Electrician for one of our major clients. The position is a contract hire with rotational cycle. It will also be based in Black Sea Ukraine CANDIDATES MUST BE ABLE TO SPEAK RUSSIAN AND ENGLISH Maximum 10 years' experience Must have a valid BOSIET Must have a valid Fit to Work or UKOOA certificate Must have a valid Police Clearance Minimum of 2+ years' experience in Offshore Jack up Drilling Rig Candidate should have experience in Cyber controls, NOV (Amphion) system Candidate must have experience onboard a B- Class jack-up rig Candidate must be well conversant in English.
(Applications in English will only be considered from people who are authorized to work in this location by being a national of that country or region, or by holding a valid work permit.)
We are currently looking for a Maintenance Supervisor for one of our major clients. The position is a contract hire with rotational cycle. The position is based in Black Sea, Ukraine. Minimum of 5 years' experience in offshore drilling rig Candidates must be able to speak English and or a European language. Candidate should have experience on NOV (Amphion) software.. Candidate should have experience on a Cyber Jack-up rig. CANDIDATES MUST BE ABLE TO SPEAK RUSSIAN AND ENGLISH Maximum 10 years' experience Must have a valid BOSIET Must have a valid Fit to Work or UKOOA certificate Must have a valid Police Clearance Minimum of 2+ years' experience in Offshore Jack up Drilling Rig Candidate should have experience in Cyber controls, NOV (Amphion) system Candidate must have experience onboard a B-Class jack-up rig Candidate must be well conversant in English. (Applications will only be considered from people who are authorized to work in this location by being a national of that country or region, or by holding a valid work permit.)
We are currently looking for a Senior Tool Pusher for one of our major clients. The position is a contract hire with rotational cycle. The position is based in Black Sea, Ukraine. Minimum of 5 years' experience in offshore drilling rig
CANDIDATES MUST BE ABLE TO SPEAK RUSSIAN AND ENGLISH. Maximum 10 years' experience Must have a valid BOSIET Must have a valid Fit to Work or UKOOA certificate Must have a valid Police Clearance Must have a valid IWCF Minimum of 4+ years' experience on Offshore Jack up Drilling Rig Candidate should have experience in Cyber controls, NOV (Amphion) system Candidate must have experience onboard a B-Class jack-up rig Candidate must be well conversant in English. UKRAINE (Applications will only be considered from people who are authorized to work in this location by being a national of that country or region, or by holding a valid work permit.)
We are currently looking for 2 Electronics Technician for one of our major clients. The position is a contract hire with rotational cycle. It will also be based in Black Sea CANDIDATES MUST BE ABLE TO SPEAK RUSSIAN AND ENGLISH Maximum 10 years' experience Must have a valid BOSIET Must have a valid Fit to Work or UKOOA certificate Must have a valid Police Clearance Minimum of 2+ years' experience in Offshore Jack up Drilling Rig Candidate should have experience in Cyber controls, NOV (Amphion) system Candidate must have experience onboard a B-Class jack-up rig Candidate must be well conversant in English. UKRAINE (Applications will only be considered from people who are authorized to work in this location by being a national of that country or region, or by holding a valid work permit.)
The position is a contract hire with rotational cycle. This position is in Black Sea, Ukraine. Oversee periodic inspection and lubrication of draw works, top-drive, pipe handling machines, swivel, etc. ensure crew follows planned lubrication schedule. Have crew inspect equipment for wear, leaks, etc. Ensure crew is aware of and adheres to all regulatory requirement and stress safe working practices. Complete IADC drilling reports, maintain pipe tally, record tour data, maintain BHA work sheets, make notes on drilling recorder, kill sheets, hole fill records, and trip sheets. Minimum of 4+ years' experience in Offshore Jack up Drilling Rig Experience in Cyber controls, NOV (Amphion) system Candidate must be well conversant in English. UKRAINE (Applications will only be considered from people who are authorized to work in this location by being a national of that country or region, or by holding a valid work permit.) CANDIDATES MUST BE ABLE TO SPEAK RUSSIAN AND ENGLISH Maximum 10 years' experience Must have a valid BOSIET Must have a valid Fit to Work or UKOOA certificate Must have a valid Police Clearance Must have a valid IWCF Minimum of 2+ years' experience in Offshore Jack up Drilling Rig Candidate should have experience in Cyber controls, NOV (Amphion) system Candidate must have experience onboard a B-Class jack-up rig
UKRAINE (Applications will only be considered from people who are authorised to work in this location by being a national of that country or region, or by holding a valid work permit.)
Aim: To provide technical expertise and plan/perform logging operations. Location of Work: Primarily a field-based role.
Job Duties:
Act as liaison between company and customer. Attend pre-job meetings and prepare equipment related to customer requirements. Plan and perform rig site operations and troubleshoot field problems. Ensure required equipment is on-site and fully functional. Ensure logging data is recorded, prepared, checked, certified and filed to conform with company policies and customer requirements. Ensure company QA policy and recommended operating procedures are followed and adhered to in operation of all company equipment. Carry out all work in a safe manner and in accordance with company and client policy and national legislation. Assist in function testing, assembly and preparation of equipment. Prepare final reports and attend post-job meetings as necessary. Process data and assist in onshore operational matters, as required. Assist in training of new staff where appropriate. Perform other relevant duties as requested/required by management.
Computer Skills and Software used:
Windows operating system. MS Office. Company-specific software.
Employee Requirements
Education and Training:
Educated to undergraduate level or above in Science/Engineering discipline or equivalent, or relevant oilfield experience.
Skills and Aptitudes:
Excellent interpersonal and communication skills. Excellent organizational skills, including the ability to work to deadlines. Ability to comprehend technical concepts. Aptitude for learning new and advancing technology. Ability to adapt and cope with changing circumstances and schedules. Ability to work under pressure and cope with harsh environmental conditions. English - Intermediate level.
- Обслуживание технологической установки по переработке твердых и жидких нефтешламов. - Выполнение поставленных объемов. - Подержание чистоты на площадке. - Выполнение поручений Мастера.
Требуется:
- Отсутствие судимости. - Без ограничений по здоровью. - Опыт работы в районах Севера. (желательно) - Опыт области нефтегазового комплекса. (желательно) - Среднее или Среднее специальное.
Мы предлагаем:
- Вахтовый метод в районах ХМАО.(30/15;60/30) - Выплачиваются суточные. - Проживание. - Оплачивается проезд до места работы и обратно( по предъявлению билета). - Соц. пакет в соответствии с ТК. РФ.
З/П: от 35 000 руб.+ премии по результатам выработки
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Russia. The Civil and Structural Supervisor will be involved in a major construction project.
Activities:
• Field supervision of Contractor's Civil & Structural Works • To ensure all activities are carried out in respect of Company policy. • To ensure the application of the Company Project technical specifications and General Standards. • To ensure the works are conducted on the basis of Contractual obligations in terms of QA/QC, Costs and timing. • To ensure technical support to Contractor and to provide technical solutions for field queries. • To monitor the work progress and proactively attend technical meetings with Contractors. • Carry out inspection as well as resolving and monitoring rectifications works • Supervise the construction of works and incorporation of materials and ensure that they are carried out in accordance with the Project Plan • Assist the Engineers in ensuring that the works are carried out to schedule and in accordance to relevant regulations • Ensure company's safety rules are observed and obeyed
Context and environment:
• Rotation 11w/2w
Qualifications and Experience required:
Graduate engineer with minimum 5 years experience in the oil, gas and construction industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Russia. The Electrical Engineer will be involved in a major oil&gas EPC' project.
Activities:
A-Development Technology know how and Commercial support ▪ Provide technical support B-Feasibility ▪ Provide technical support C-Bidding phase/Commercial proposal development ▪ Analyse and understand Tender documentation ▪ Take part in electrical system design review ▪ Identify technical queries, deviations and alternatives to be submitted ▪ Implement bidding methodologies, design criteria and guidelines ▪ Define and issue request for quotation for items not estimated in house ▪ Coordinate material quantities and weights (MTOs) estimation ▪ Prepare bill of quantities for erection works cost estimation ▪ Support Electrical Lead to define manhours estimation D-Project Execution (Job progress and completion) ▪ Review Client technical documentation and requirements ▪ Take part in definition of electrical engineering requirements ▪ Prepare Project design criteria for electrical system ▪ Define the configuration of the electrical system and the single line diagram
Context and environment:
• Resident
Qualifications and Experience required:
Graduate engineer with minimum 10 years experience in the oil and gas industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Russia. The Instrumentation Engineer will be involved in a major oil&gas EPC' project.
Activities:
A - Development Technology know how and Commercial support B - FeasibilityC - Bidding phase/Commercial proposal development ▪ Prepare Instrumentation elements (tagged items and bulk material), quantities for cost and erection works estimates ▪ Support Discipline Lead to define man hours and cost estimates D - Project Execution ▪ Review Client technical documentation and requirements ▪ Coordinate subcontracted engineering activities and control subcontracted engineering documents ▪ Define engineering design basis and guidelines ▪ Prepare the technical documentation for Instrumentation elements material and services requisitions and prepare, according to internal procedures, the technical evaluations ▪ Provide technical support to Project Team ▪ Optimise Instrumentation design ensuring minimal cost and complexity in compliance with the contractual and safety requirements ▪ Prepare Instrumentation technical specifications ▪ Prepare Instrumentation data sheets
Context and environment:
• Resident
Qualifications and Experience required:
Graduate engineer with minimum 10 years experience in the oil and gas industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Moscow, Russia. Packages Lead will be involved in a major Oil & Gas EPC’s project.
Activities:
• Provide technical support to other Project positions for specialist aspects • Analyse and understand Tender documentation • Define Discipline list of activities and deliverables and coordinate activities in accordance with Project schedule • Identify technical queries, deviations and alternatives to be submitted • Implement bidding methodologies, design criterias and guidelines • Define and issue Request for quotation for not estimated in-house items • Coordinate material quantities and weight estimation • Prepare engineering manhour and material cost estimations • Support the Proposal Manager during technical clarification meetings with the Client • Ensure the achievement of the assigned goal and the fulfillment of the Project quality and contractual requirements. Take the necessary corrective actions within the Discipline Project Team to meet the assigned goal. Report to the TM for more extensive problems • Define list of activities and deliverables, setup time schedule, coordinate activities in accordance with contractual requirements • Ensure Discipline Project progress, monitor and control manhour consumption • Prepare technical annexes for engineering activities to be subcontracted • Ensure subcontractor coordination and monitoring/reporting to PM of the Discipline budget costs • Ensure proper Discipline workflow, interfaces, quality checks and approval of all Discipline Project documents, including • Vendor ones • Track and report to TM Discipline scope of work changes updating manhour and cost estimates • Provide technical support to Project functions including Procurement and Construction • Support PM in technical interfacing with the Client (according to TM) • Define and issue Purchase Requisitions • Ensure Technical Bid Evaluations • Ensure Vendor follow-up activities • Provide technical support for the definition of the Discipline construction inspection plan • Manage Vendor inspection test plan approval and support post order activities • Support the construction team in implementing the engineering solutions at site • Home office activities (master) • Verify manhour and cost estimates • Check key Project documents according to internal procedures
Context and environment:
• Resident
Qualifications and Experience required:
Graduate engineer with minimum 15 years experience in the oil and gas industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
Нефтедобывающей и нефтеперерабатывающей компания ООО "Таймура", находящейся в Эвенкийском районе Красноярского края в поселке Ванавара, требуется специалист по вводу присадок в нефтепродукты. Метод работы - вахтовый Дорога и проживание оплачивается. Присылайте свои резюме на электронную почту kmv@pzcm.com
