Our client (EPC projects) is looking for Electrical Engineer:
CANDIDATES MUST HAVE ELIGIBILITY TO WORK in RF and FLUENT RUSSIAN.
▪ Perform the electrical discipline engineering activities in accordance with Project requirements, within time schedule and quality standards
▪ Ensure in/out information flow with all Project interfaces
The Engineer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements.
Tasks include:
A-Development Technology know how and Commercial support
▪ Provide technical support
B-Feasibility
▪ Provide technical support
C-Bidding phase/Commercial proposal development
▪ Analyse and understand Tender documentation
▪ Take part in electrical system design review
▪ Identify technical queries, deviations and alternatives to be submitted
▪ Implement bidding methodologies, design criteria and guidelines
▪ Define and issue request for quotation for items not estimated in house
▪ Coordinate material quantities and weights (MTOs) estimation
▪ Prepare bill of quantities for erection works cost estimation
▪ Support Electrical Lead to define manhours estimation
D-Project Execution (Job progress and completion)
▪ Review Client technical documentation and requirements
▪ Take part in definition of electrical engineering requirements
▪ Prepare Project design criteria for electrical system
▪ Define the configuration of the electrical system and the single line diagram
▪ Perform electrical system calculation and studies (e.g. power demand, load flow, short circuit, transient stability, motor starting) to define the equipments rating
▪ Prepare relay and metering schemes, protective relays coordination study and setting tables
▪ Define the functional philosophies for the electrical system control (power management, synchronization, load shedding, reacceleration and restarting) and control system architecture
▪ Prepare technical documentation (e.g. specifications, data sheets) for electrical equipments and materials
▪ Check and review technical documentation according to Project and Saipem procedures
▪ Prepare Purchase Requisitions and bids technical evaluation
▪ Perform check and review of Vendor technical documentation
▪ Provide technical support to Procurement in purchasing and to Post order in expediting and testing
▪ Develop electrical system plant design (e.g. cable routings, grounding) and substations arrangements
▪ Perform power cables sizing
▪ Define typical installation details, bulk materials selection and take off (MTOs)
▪ Define bill of quantities and prepare technical documentation for electrical system installation
▪ Define technical procedure for electrical system testing and energization
E-Construction and start up
▪ Support Construction for electrical system installation works and bulk materials management
▪ Assist, when necessary, engineering adjustment and define modifications
▪ Revise as built the technical documentation
▪ Support Commissioning for electrical system testing and energization
Knowledge of tools related to 2D and 3D modelling activities
Capability to perform electrical system calculations and studies (power demand, load flow, short circuit, transient stability, motor
starting, harmonics, power cables sizing, grounding, illumination levels) to define systems and equipments ratings by means of Corporate
and Operating Center Discipline technical design software tools Capability to design electrical systems (power
generation and distribution, grounding, lighting, etc.)
Capability to define the functional philosophies fo the electrical system automatic control (power
management, synchronization, load shedding, reacceleration and restarting). Knowledge of
electrical monitoring and control systems architercure and relevant hardware devices and
communication protocols
Fluent Russian, English (Fluent - disirable, intermediate is possible).
Office location: Universitet metro station (corporate transport form Kievskaya metro station).
Our client (EPC projects) is looking for Piping Designer (4 positions opened):
CANDIDATES MUST HAVE ELIGIBILITY TO WORK in RF and FLUENT RUSSIAN.
▪ Manage on a project a team of Piping and Layout Draftsmen in order to carry out the Piping and Layout part of the installations, 3D CAD model and the Piping and Layout construction drawings in accordance with technical, budget and schedule targets, under responsibility of the project Piping and layout leader or piping engineers
Execute the activities within own area of responsibility, ensuring the compliance with the QA/QC and HSE requirements
Tasks include:
A - Development Technology know how and Commercial support
B - Feasibility
C - Bidding phase/Commercial proposal development
D - Project Execution
▪ Design, execute or check the typical Piping and Layout studies including:
- 3D modelling
- 3D model review with other disciplines and issue of clash check report
- Construction or design drawings using 2D software or extracted from 3D for piping networks (overall plot plan, equipment
layout drawings, piping general arrangement, piping isometrics and piping supports)
- Bill of materials or material take off
- Extraction of bill of materials and other information from the 3D CAD model
▪ Organize the work of his team and follow-up the planning of the resources mobilisation
▪ Co-ordinate the work of his team with the Piping and Layout engineers of the project
▪ Check the input data and all the documents and information issued by his team
▪ Check permanently that all the assumptions upon which his team work is based keep up with the project development and
warn the project Piping and Layout Lead of any detected anomaly
▪ Supervise documents updating after comments issued by other disciplines (inter-discipline checks) or external stakeholders
(Client, Yards, Third party review, etc.)
▪ Feed the Piping and Layout Department improvement system by reverting the lessons learned during the project
E - Construction and start up
▪ Material Management at site
▪ Engineering support during construction phase
Knowledge of tools related to 2D and 3D modelling activities
Capability to develop equipment layout according to process requiremets defined on PFD or P and
D and in accordance to the engineering good practices: developing the single line structure to
ay the piping distribution and the equipment elevation
Knowledge of Discipline engineering design criterias, methods and workflows from conceptual
phase up to site engineering phase. Capability to define the technical documents set based on
Project quantities and scope of work. Capability to perform and coordinate Project engineering
documents production activities and to check and review design documents, prepared either
nternally or by Vendors
Fluent Russian, English (Fluent - disirable, intermediate is possible).
Office location: Universitet metro station (corporate transport form Kievskaya metro station).
The Company:Our client (EPC projects) is looking for Packages Specialist Lead: CANDIDATES MUST HAVE ELIGIBILITY TO WORK in RF and FLUENT RUSSIAN. ▪
Lead the Package Engineering activities in accordance with Project requirements within the assigned budget, time schedule and quality standards. Ensure compliance with all Project interfaces and supervise in/out information flow ▪ Contribute to the capitalisation of Project experience in order to improve and harmonize work methodologies through continuos imThe Role:Tasks include: A-Development of Technology know how and Commercial support B-Feasibility ▪ Provide technical support to other Project positions for specialist aspects C-Bidding phase/Commercial proposal ▪ Analyse and understand Tender documentation ▪ Define Discipline list of activities and deliverables and coordinate activities in accordance with Project schedule ▪ Identify technical queries, deviations and alternatives to be submitted ▪ Implement bidding methodologies, design criterias and guidelines ▪ Define and issue Request for quotation for not estimated in-house items ▪ Coordinate material quantities and weight estimation ▪ Prepare engineering manhour and material cost estimations ▪ Support the Proposal Manager during technical clarification meetings with the Client D-Project Execution ▪ Ensure the achievement of the assigned goal and the fulfillment of the Project quality and contractual requirements. Take the necessary corrective actions within the Discipline Project Team to meet the assigned goal. Report to the TM for more extensive problems ▪ Define list of activities and deliverables, setup time schedule, coordinate activities in accordance with contractual requirements ▪ Ensure Discipline Project progress, monitor and control manhour consumption ▪ Prepare technical annexes for engineering activities to be subcontracted ▪ Ensure subcontractor coordination and monitoring/reporting to PM of the Discipline budget costs ▪ Ensure proper Discipline workflow, interfaces, quality checks and approval of all Discipline Project documents, including Vendor ones ▪ Track and report to TM Discipline scope of work changes updating manhour and cost estimates ▪ Provide technical support to Project functions including Procurement and Construction ▪ Support PM in technical interfacing with the Client (according to TM) ▪ Define and issue Purchase Requisitions ▪ Ensure Technical Bid Evaluations ▪ Ensure Vendor follow-up activities ▪ Provide technical support for the definition of the Discipline construction inspection plan ▪ Manage Vendor inspection test plan approval and support post order activities E-Construction and start up ▪ Support the construction team in implementing the engineering solutions at site F-Home office activities (master) ▪ Verifiy manhour and cost estimates ▪ Check key Project documents according to internal procedures ▪ Support Project teams to solve non standard technical issues ▪ Update Discipline workflows and technical standards ▪ Support execution plan definition ▪ Monitor Discipline Project KPIs ▪ Participate to Vendor technical qualification and to procurement strategy definitionEssential Skills / Qualifications:Fluent Russian, English (Fluent - disirable, intermediate is possible). Office location: Universitet metro station (corporate transport form Kievskaya metro station).
Our client (EPC projects) is looking for Onshore Structure Engineer:
CANDIDATES MUST HAVE ELIGIBILITY TO WORK in RF and FLUENT RUSSIAN.
▪ Perform technical tasks assigned by the Civil and Structural Lead, related with design, verification and checking of all steel structures, in order to operate in compliance with assigned budget, time schedule and quality standards
▪ Ensure the interfaces with the other Discipline Specialists and coordinate activities performed inside or outside the Compan
The Engineer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements
Tasks include:
A-Development Technology know how and Commercial support
▪ Provide technical support
B-Feasibility
▪ Provide technical support
C-Bidding phase/Commercial proposal development
▪ Analyse and understand Tender documentation
▪ Define list of activities and deliverables, coordinate activities in accordance with Project schedule
▪ Identify technical queries, deviations and alternatives to be submitted
▪ Implement the bidding methodologies, the design criterias and guidelines
▪ Prepare tender document for steelworks market survey
▪ Prepare material quantities and weights (MTOs) estimation
D-Project Execution (Job progress and completion)
▪ Ensure the assigned goals achievement and the fulfillment of the project quality and contractual requirements. Take the necessary corrective actions together with the Discipline Lead to meet the assigned goals
▪ Define list of activities and deliverables related to steelworks, set up with the Dicipline Lead the time schedule, coordinate activities in accordance with contractual requirements (including 3D activities)
▪ Prepare specification for purchase of steelworks material, providing technical support to procurement department in defining delivery lots during project execution
▪ Prepare detailed BOQ for steelworks in accordance with Company procedure and maintain updated MTOs in order to prevent and/or mitigate quantity escalation
▪ Prepare documentation for technical annexes for engineering activities subcontracting
▪ Develop studies for strucyures configuration including details to be implemented
▪ Ensure proper quality checks of all discipline project documents executed inside or outside the company, including Vendors documents
▪ Track and report to Discipline Lead the scope of work changes updating manhour and cost estimates
▪ Provide technical support to Project functions including Procurement and Construction
▪ Support Discipline Lead in technical interface with Client
▪ Prepare together with Discipline Lead Technical Bid Evaluations
▪ Ensure follow-up of steelwork manufacturer activities, approving shop drawings and monitoring delivery schedule in accordance with project needs
▪ Provide technical support for the definition of the discipline construction inspection plan
▪ Prepare with Discipline Lead Vendor inspection test plan and support post order activities E-Construction and start up
▪ Provide support field engineering at site
▪ Prepare modification drawings / instructions to be executed at site including punch list item clearing
Knowledge of tools related to 2D and 3D modelling activities
Knowledge of Discipline engineering design criterias, methods and workflows from conceptual
phase up to site engineering phase. Capability to define the technical documents set based on
Project quantities and scope of work. Capability to perform and coordinate Project engineering
documents production activities and to check and review design documents, prepared either
internally or by Vendors Capability to estimate Discipline Work Orders and
Bid Projects engineering manhours budget based on the Project quantities and scope of work
according to Corporate standards, procedures, methods and tools. Capability to estimate
Discipline items costs budget based on Project quantities and technical requirements according to Corporate standards, procedures, methods and tools. Capability to monitor the relevant actvity progress and the actual manhours spent vs the earned progress
Our client (EPC projects) is looking for Civil and Structural Lead:
CANDIDATES MUST HAVE ELIGIBILITY TO WORK in RF and FLUENT RUSSIAN.
▪ Lead the Civil and Structural Engineering activities in accordance with Project requirements within the assigned budget, time schedule and quality standards. Ensure compliance with all Project interfaces and supervise in/out information flow
▪ Contribute to the capitalisation of Project experience in order to improve and harmonize work methodologies through
The PSL ensures the execution of the engineering activities within his area of responsibility, works following the TM guidelines, cooperates with the other Project positions and ensures the compliance with the QA/QC and HSE requirements.
Tasks include:
A-Development of Technology know how and Commercial support
B-Feasibility
▪ Provide technical support to other Project positions for specialist aspects
C-Bidding phase/Commercial proposal
▪ Analyse and understand Tender documentation
▪ Define Discipline list of activities and deliverables and coordinate activities in accordance with Project schedule
▪ Identify technical queries, deviations and alternatives to be submitted
▪ Implement bidding methodologies, design criterias and guidelines
▪ Define and issue Request for quotation for not estimated in-house items
▪ Coordinate material quantities and weight estimation
▪ Prepare engineering manhour and material cost estimations
▪ Support the Proposal Manager during technical clarification meetings with the Client D-Project Execution
▪ Ensure the achievement of the assigned goal and the fulfillment of the Project quality and contractual requirements. Take the necessary corrective actions within the Discipline Project Team to meet the assigned goal. Report to the TM for more extensive problems
▪ Define list of activities and deliverables, setup time schedule, coordinate activities in accordance with contractual requirements
▪ Ensure Discipline Project progress, monitor and control manhour consumption
▪ Prepare technical annexes for engineering activities to be subcontracted
▪ Ensure subcontractor coordination and monitoring/reporting to PM of the Discipline budget costs
▪ Ensure proper Discipline workflow, interfaces, quality checks and approval of all Discipline Project documents, including Vendor ones
▪ Track and report to TM Discipline scope of work changes updating manhour and cost estimates
▪ Provide technical support to Project functions including Procurement and Construction
▪ Support PM in technical interfacing with the Client (according to TM)
▪ Define and issue Purchase Requisitions
▪ Ensure Technical Bid Evaluations
▪ Ensure Vendor follow-up activities
▪ Provide technical support for the definition of the Discipline construction inspection plan
▪ Manage Vendor inspection test plan approval and support post order activities E-Construction and start up
▪ Support the construction team in implementing the engineering solutions at site
F-Home office activities (master)
▪ Verify manhour and cost estimates
▪ Check key Project documents according to internal procedures
Support Project teams to solve non standard technical issues
Update Discipline workflows and technical standards
Support execution plan definition
Monitor Discipline Project KPIs
Participate to Vendor technical qualification and to procurement strategy definition
Knowledge of tools related to 2D and 3D modelling activities
Knowledge of engineering design criteria for foundations, concrete structures and works, steel
structures (piperacks, equipment support structures, services platforms, shelters etc.).
Capability to identify proper technical solutions versus construction criticalities
Capability to plan Discipline engineering activities and documentation deliverables in order to meet
Project schedule milestones considering design workflows and engineering interfaces with all other
Project Disciplines and functions Capability to manage dynamic changes due to
Our client (EPC projects) is looking for Civil and Structural Lead:
CANDIDATES MUST HAVE ELIGIBILITY TO WORK in RF and FLUENT RUSSIAN.
▪ Lead the Civil and Structural Engineering activities in accordance with Project requirements within the assigned budget, time schedule and quality standards. Ensure compliance with all Project interfaces and supervise in/out information flow
▪ Contribute to the capitalisation of Project experience in order to improve and harmonize work methodologies through
The PSL ensures the execution of the engineering activities within his area of responsibility, works following the TM guidelines, cooperates with the other Project positions and ensures the compliance with the QA/QC and HSE requirements.
Tasks include:
A-Development of Technology know how and Commercial support
B-Feasibility
▪ Provide technical support to other Project positions for specialist aspects
C-Bidding phase/Commercial proposal
▪ Analyse and understand Tender documentation
▪ Define Discipline list of activities and deliverables and coordinate activities in accordance with Project schedule
▪ Identify technical queries, deviations and alternatives to be submitted
▪ Implement bidding methodologies, design criterias and guidelines
▪ Define and issue Request for quotation for not estimated in-house items
▪ Coordinate material quantities and weight estimation
▪ Prepare engineering manhour and material cost estimations
▪ Support the Proposal Manager during technical clarification meetings with the Client D-Project Execution
▪ Ensure the achievement of the assigned goal and the fulfillment of the Project quality and contractual requirements. Take the necessary corrective actions within the Discipline Project Team to meet the assigned goal. Report to the TM for more extensive problems
▪ Define list of activities and deliverables, setup time schedule, coordinate activities in accordance with contractual requirements
▪ Ensure Discipline Project progress, monitor and control manhour consumption
▪ Prepare technical annexes for engineering activities to be subcontracted
▪ Ensure subcontractor coordination and monitoring/reporting to PM of the Discipline budget costs
▪ Ensure proper Discipline workflow, interfaces, quality checks and approval of all Discipline Project documents, including Vendor ones
▪ Track and report to TM Discipline scope of work changes updating manhour and cost estimates
▪ Provide technical support to Project functions including Procurement and Construction
▪ Support PM in technical interfacing with the Client (according to TM)
▪ Define and issue Purchase Requisitions
▪ Ensure Technical Bid Evaluations
▪ Ensure Vendor follow-up activities
▪ Provide technical support for the definition of the Discipline construction inspection plan
▪ Manage Vendor inspection test plan approval and support post order activities E-Construction and start up
▪ Support the construction team in implementing the engineering solutions at site
F-Home office activities (master)
▪ Verify manhour and cost estimates
▪ Check key Project documents according to internal procedures
Support Project teams to solve non standard technical issues
Update Discipline workflows and technical standards
Support execution plan definition
Monitor Discipline Project KPIs
Participate to Vendor technical qualification and to procurement strategy definition
Knowledge of tools related to 2D and 3D modelling activities
Knowledge of engineering design criteria for foundations, concrete structures and works, steel
structures (piperacks, equipment support structures, services platforms, shelters etc.).
Capability to identify proper technical solutions versus construction criticalities
Capability to plan Discipline engineering activities and documentation deliverables in order to meet
Project schedule milestones considering design workflows and engineering interfaces with all other
Project Disciplines and functions Capability to manage dynamic changes due to
Our client (EPC projects) is looking for Civil Works Designer:
CANDIDATES MUST HAVE ELIGIBILITY TO WORK in RF and FLUENT RUSSIAN.
▪ Perform technical tasks assigned by Discipline Leader or Specialists, related with drafting, modeling and designing activities, estimation of civil and steel works, checking of deliverables with the main target to operate in compliance with Project requirements, time schedule and quality standards
The Designer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements
Tasks include:
A-Development Technology know how and Commercial support
▪ Provide technical support
B-Feasibility
▪ Provide technical support
C-Bidding phase/Commercial proposal development
▪ Prepare list of deliverables and developed sketches for studies
▪ Prepare material quantities (BOQs) and weights (MTOs) estimation D-Project Execution (Job progress and completion)
▪ Set up and execute assigned activities related to production of drawings and assessment of quantities in accordance with project requirements and milestones
▪ Prepare sketches for studies and pre-design of civil and structural works, pursuing objectives of sound design practice and optimises in term of costs, fabrication simplicity and safety
▪ Prepare detailed BOQ for civil works and MTO for steel structure
▪ Ensure proper quality checks of all Discipline project deliverables issued by subcontractors inside or outside the Company
▪ Coordinate drafting activities developed inside and outside the Company
▪ Maintain and update documentation list E-Construction and start up
▪ Provide support field engineering at site
Knowledge of tools related to 2D and 3D modelling activities
Knowledge of engineering design criteria for foundations, concrete structures and works, steel
structures (piperacks, equipment support structures, services platforms, shelters etc.).
Capability to identify proper technical solutions versus construction criticalities
Knowledge of Discipline engineering design criterias, methods and workflows from conceptual
phase up to site engineering phase. Capability to define the technical documents set based on
Project quantities and scope of work. Capability to perform and coordinate Project engineering
documents production activities and to check and review design documents, prepared either
The Company:Our client (EPC projects) is looking for Process Engineer: CANDIDATES MUST HAVE ELIGIBILITY TO WORK in RF and FLUENT RUSSIAN. Elaborate, define, size and validate - within a process team - the various items, units and technical deliverables to be implemented in the Project. Work under the supervision of the Process LeadThe Role:▪ Develop Heat and Material Balances using simulation software ▪ Develop Process Flow diagrams to show unit operations necessary to convert feedstocks into on-specification products, in the most economical manner ▪ Define and size Equipment and Instrumentation to be implemented and issue relevant Process Data sheets ▪ Elaborate Piping and Instrumentation Diagrams (P and IDs) ▪ Perform hydraulic and thermal calculations on piping systems, in steady state and transient operation ▪ Define the utilities requirements and design the associated systems ▪ Define quantities and characteristics of effluents to be disposed to the environment ▪ Ensure the preparation of Operating Manual and Test Run procedures ▪ Implement contractual design philosophy ▪ Check technical quality of calculations, sw simulations and deliverables produced by junior engineers ▪ Take part of the multidisciplinary project reviews such as P and IDs, HAZOP, 3D ModelEssential Skills / Qualifications:Knowledge of Discipline engineering design criterias, methods and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors Basic knowledge of piping, electrical, mechanical, machinery, instrumentation engineering disciplines Knowledge of main international Discipline standards, codes and regulations. Capability to analise dedicated Project requirements in terms of local standards and codes and to identify proper implementation actionsDesirable Skills / Qualifications:Fluent Russian, English (Fluent - disirable, intermediate is possible). Office location: Universitet metro station (corporate transport form Kievskaya metro station).
The Company:Our client (EPC projects) is looking for Civil Works Engineer: CANDIDATES MUST HAVE ELIGIBILITY TO WORK in RF and FLUENT RUSSIAN. ▪ Perform technical tasks assigned by the Civil and Structural Lead, related with design, verification and checking activities, in order to operate in compliance with assigned budget, time schedule and quality standards ▪ Ensure the interfaces with the other Project Specialists and Designers to coordinate activities perfomed inside or outside the Company ▪ GatheThe Role:The Engineer executes the activities within his area of responsibility, ensuring the compliance with the QA/QC and HSE requirements Tasks include: A-Development Technology know how&Commercial support ▪ Provide technical support B-Feasibility ▪ Provide technical support C-Bidding phase/Commercial proposal development ▪ Review Tender technical documents ▪ Define list of activities and deliverables, coordinate activities in accordance with Project schedule ▪Identify technical queries, deviations and alternatives to be submitted ▪ Implement the bidding methodologies, the design criterias and guidelines ▪ Assist proposal team with request for quotation for commercial purpose ▪ Prepare material quantities and weights (MTOs) estimation ▪ Prepare engineering manhours and items, bulk and material costs estimations ▪ Discuss with client, attend to clarification meetings D-Project Execution (Job progress and completion) ▪ Ensure the assigned goals achievement and the fulfillment of the project quality and contractual requirements ▪ Define list of activities and deliverables, set up with the Dicipline leader the time schedule, coordinate activities in accordance with contractual requirements ▪ Prepare design specification for civil works (e.g. concrete works, plant roads, underground networks, piling works) ▪ Prepare detailed BOQ for civil works and buildings and MTO for steel structure ▪ Prepare documentation for technical annexes for engineering activities subcontracting ▪ Develop drain water, sewage system layout, plumbing system inside buildings ▪ Develop studies for foundations and concrete structures ▪ Ensure proper quality checks of all Discipline project documents including Vendors documents ▪ Track and report to Discipline leader the scope of work changes updating manhour and cost estimates ▪ Provide technical support to Project functions including Procurement and Construction ▪ Support Discipline leader/TM in technical interface with Client ▪ Prepare technical documentation for civil material requisition and assist the procurement dept. in the technical evaluations ▪ Prepare together with Discipline leader Technical Bid Evaluations ▪ Review Client's technical documentation and requirements ▪ Maintain project technical files ▪ Set up and execute assigned engineering activities such as detail design, verification and studies ▪ Supervise/Approve engineering design and construction drawings of civil items related to foundations, concrete structures and buildings ▪ Implement discipline follow-up activities ▪ Monitor trend of civil quantities with respect to bid phase estimation ▪ Design of functional layouts, architectural aspects (3D modelling), finishing and furniture E-Construction&start upEssential Skills / Qualifications:Full knowledge of engineering design criteria for foundations, concrete structures and concrete works items like paving, pits, trenches, etc., including knowledge of criticalities related to construction Knowledge of Discipline engineering design criterias, methods and workflows from conceptual phase up to site engineering phase. Capability to define the technical documents set based on Project quantities and scope of work. Capability to perform and coordinate Project engineering documents production activities and to check and review design documents, prepared either internally or by Vendors Capability to estimate Discipline Work Orders and Bid Projects engineering manhours budget based on the Project quantities and scope of work according to Corporate standards, procedures, methods and tools. Capability to estimate Discipline items costs budget based on Project quantities and technical requirements according to Corporate standards, procedures, methods and tools.Desirable Skills / Qualifications:Fluent Russian, English (Fluent - disirable, intermediate is possible). Office location: Universitet metro station (corporate transport form Kievskaya metro station).
Вахта. Крупной организации срочно требуется прораб по руководству работами строительству а/дорог (зимников). Образование по специальности: "Автомобильные дороги и аэродромы", желателен опыт строительства "Зимников". Опыт не менее 2-х лет в должности мастера. До 50 лет. Район работы: Ванкорское месторождение. График: 60/60 дней. З/п от 60000 р. в месяц. Официальное трудоустройство, полный соцпакет. Проезд ж/д, питание в столовой (компенсация 5000 р. в месяц), проживание (вагончики) и спец.одежда за счет компании. Только для жителей Красноярского края. Услуги КА «Северное сияние» оплачивает соискатель. Адрес: г. Красноярск, ул. Профсоюзов 3,стр.2,офис 301.
Вахта. Крупной организации срочно требуется мастер СМР. Образование по специальности: "Автомобильные дороги и аэродромы", желателен опыт строительства "Зимников". Опыт не менее 2-х лет в должности мастера. До 50 лет. Район работы: Ванкорское месторождение. График: 60/60 дней. З/п от 60000 р. в месяц. Официальное трудоустройство, полный соцпакет. Проезд ж/д, питание в столовой (компенсация 5000 р. в месяц), проживание (вагончики) и спец.одежда за счет компании. Только для жителей Красноярского края. Услуги КА «Северное сияние» оплачивает соискатель. Адрес: г. Красноярск, ул. Профсоюзов 3,стр.2,офис 301.
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Russia. The Electrical Superintendent will be involved in a major Oil & Gas operator’s project.
Activities:
• Encourage and promote company’s values through the team members. • Maintain good motivation and moral within integration construction team. • Ensure that all members of the team are aware that in addition to quality and good engineering practice, planning, meeting deadlines and cost must be a permanent concern. • Follow up, review, comment on all documentations produced by contractors. • Verify that the Contractor(s) are administrating properly the Company Long Lead Items. • Plan, manage, control and deliver the overall electrical works at remote pads. • Manage technical interfaces related to Electrical between EPCC Contracts, LLI’s … • Liaise with Operations to develop and implement projects in line with current Operation and Maintenance philosophy. • Oversee all responsible teams activities to ensure that all technical, contractual and cost information are properly recorded, collated and available for inspection/reference as required by law, regulations and company policies. • Manage external parties that include design institutes, contractors and vendors to ensure that the project development associated with CPF up-grade and remote well pads integration activities are carried out in the safe manner within the project schedule and budget. • Anticipate potential problems. Analyse and propose corrective actions. • Provide input and review quality assurance and control procedure. • Liaise closely and ensure coordination with other work packages Superintendents, to ensure complete and timely hand-over of CPF and remote pads construction scopes to commissioning. • Make necessary arbitration between different work packages and disciplines, the only criteria being the benefit of the overall project. • Define and manage a strategy to minimize shutdowns. • Assist or issue in due time all reporting (daily, weekly, monthly, final report …). • Participates in meeting related to the area of responsibility. • Provide support/participate to pre-commissioning & commissioning activities related to Electrical part.
Context and environment:
• Rotation 28d/28d
Qualifications and Experience required:
Graduate engineer with minimum 8 years experience in the oil and gas industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
Troubleshoot hardware, software and network operating system Be familiar with all hardware and software Be familiar with network operating system and strong networking troubleshooting skills Provide orientation to new users of existing technology and products Coach staff about new and potential uses Provide recommendations about accessing information and support Maintain current and accurate inventory of technology hardware, software and resources Ensure that network is compliant with Group Policies, Standards and Guidelines Ensure that network, servers, desktops and laptops are protected against viruses and other malicious attacks. Ensure that Windows Updates is installed and applied to servers, desktops and laptops Ensure that Group business applications are being cared for by upgrading, installing, maintenance Ensure that backups are being made of business critical and non-business critical data including group applications Other IT support to Moscow, Novorossiysk, Murmansk, Taman and Astrakhan offices Maintenance of 1S accounting software and Lotus software The overview / oversight of developments and implementations of software links / integrations between 1S Accounting package and Group Applications to allow exchange of data between these systems
Knowledge:
Computer hardware and software systems and programs Computer networks, network administration and network installation Computer troubleshooting Networking troubleshooting Knowledge of switches, routers etc Server Operating Systems (Server 2003, Server 2008, Server 2012) Client Operating Systems (Windows XP, Windows Visa, Windows 7, Windows 8) Computer viruses and security E-mail and internet programs and understanding VMWare knowledge (Advantageous)
One of the world leaders among engineering and construction companies is looking for Lead Civil Engineer
Technical liaison between Russian Design Institute (RDI) & UK office & Client. Plan, schedule, conduct and coordinate programs of assigned engineering works. Analyze reports, maps, drawings, tests and other data to plan and design works. Prepare weekly / ad hoc summary reports on critical activities & areas of concern. Contact with clients, subcontractors, vendor’s representatives and project field personnel on a regular basis. Attend and participate in clients, subcontractors and vendors meetings Review vendor bids, analyze and make recommendations. Use engineering and design computer software applied in the company to complete assigned works. Establish list of RDI documentation deliverables Maintain awareness of client, vendor and subcontractor documentation requirements. Participate in studies, front-end detailed engineering and procurement projects. Assist with evaluation of technical design integrity. Initiate and coordinate the follow-up on outstanding items identified at weekly engineering leads meetings, ensure clarity and timely resolution of issues
Supervisor Functions: Manages company exploration and new business development geoscience, reservoir engineering, and upstream technical work.
Responsibilities:
The primary job function in the first year is to co-ordinate all aspects of acquiring geo-technical work and data on several Russian sedimentary basins (oil and gas provinces) from various Russian state and private entities including Russian technical institutes. Helps define goals, negotiate/define products, assist with contract and compliance issues, monitor progress, act as single-point-contact, and expedite delivery and quality of products received from the institutes or other entities. Working jointly in a multidisciplinary team to help evaluate potential upstream opportunities for company . These opportunities include assessment of: discovered but undeveloped fields, exploration blocks, and acquisitions. These assessments require the ability to conduct geological and geophysical interpretations of subsurface data (e.g. seismic and well logs), evaluation of subsurface risks and uncertainties, development planning, and basic resource/reserve estimates. Must be able to work with project engineers, commercial, and geopolitical staff.
Requirements:
Master'a degree or higher in geology or geophysics (or perhaps reservoir engineering). English fluent Experience working with Russian technical institutes and state organizations (Basically we need someone who can do high-level supervision of work we plan to do with various government and private institutes for about half of their time, and that can also do geo-technical work during the other half). Will need to work closely with legal and regulatory representatives to ensure compliance with Russian laws regarding the purchase, use, and export of subsurface data. Experience with the geology of West Siberia and East Siberia (Yakutia, Irkutsk, Krasnoyarsk) would be very useful. Experience: 10-15 years experience in the oil industry
Terms and conditions:
Salary, social package - discussable. Very good, multinational and proficient team. Ability to use English. Internal trainings. Business trips (abroad). Potential for foreign assignments in prospective
Supervisor Functions: Manages company exploration and new business development geoscience, reservoir engineering, and upstream technical work.
Responsibilities:
The primary job function in the first year is to co-ordinate all aspects of acquiring geo-technical work and data on several Russian sedimentary basins (oil and gas provinces) from various Russian state and private entities including Russian technical institutes. Helps define goals, negotiate/define products, assist with contract and compliance issues, monitor progress, act as single-point-contact, and expedite delivery and quality of products received from the institutes or other entities. Working jointly in a multidisciplinary team to help evaluate potential upstream opportunities for company . These opportunities include assessment of: discovered but undeveloped fields, exploration blocks, and acquisitions. These assessments require the ability to conduct geological and geophysical interpretations of subsurface data (e.g. seismic and well logs), evaluation of subsurface risks and uncertainties, development planning, and basic resource/reserve estimates. Must be able to work with project engineers, commercial, and geopolitical staff.
Requirements:
Master'a degree or higher in geology or geophysics (or perhaps reservoir engineering). English fluent Experience working with Russian technical institutes and state organizations (Basically we need someone who can do high-level supervision of work we plan to do with various government and private institutes for about half of their time, and that can also do geo-technical work during the other half). Will need to work closely with legal and regulatory representatives to ensure compliance with Russian laws regarding the purchase, use, and export of subsurface data. Experience with the geology of West Siberia and East Siberia (Yakutia, Irkutsk, Krasnoyarsk) would be very useful. Experience: 10-15 years experience in the oil industry
Terms and conditions:
Salary, social package - discussable. Very good, multinational and proficient team. Ability to use English. Internal trainings. Business trips (abroad). Potential for foreign assignments in prospective
Ищу Руководителя проектного офиса: Руководитель Проектного офиса: требуется знание английского языка, наличие PMI, опыта в Даунстрим, опыта работы с EPC контрактами
- участие в разработке стратегий и процедур технического обслуживания всего комплекса строительного оборудования Компании для всего объекта в соответствии с российским законодательством
- анализ качества выполнения операций по техническому обслуживанию, например, контроля соответствия рабочих процедур профилактического обслуживания, проверок и внепланового обслуживания согласованным планам управления работами на уровне мировых стандартов;
- контроль полного соответствия очередных и внеплановых работ по техобслуживанию правилам охраны труда, корпоративным правилам безопасности и промышленным санитарным нормам;
- обеспечение осуществления деятельности согласно задачам, поставленным перед группой инженерно-технического обеспечения и технического обслуживания механического оборудования, строительного оборудования и трубопроводов, а также обеспечение эффективного управления такой деятельностью через систему утверждения заявок на работы WRAP;
- Данная должность непосредственно подчинена начальнику отдела по трубопроводам и промышленным сооружениям
Требования:
Высшее профессиональное образование в области промышленного и гражданского строительства
Минимальный опыт работы по специальности — 6 лет Свободный английский язык
Должен знать:
- нормативные и методические материалы по строительному оборудованию, включая российские и международные нормы (ГОСТ, СНиП, АБС, API, ISO, BS EN и т.д.), в частности, знание российских и международных нормативов, касающихся опасных объектов; - специальные требования к проектированию в том виде, в каком они представлены в соответствующих корпоративных стандартах, направленные на обеспечение соответствия строительного оборудования условиям окружающей среды, характерным для о. Сахалин; - процедуры устранения типичных видов неполадок и неисправностей; основы анализа основных причин неисправностей (методология АОПН «Аполло» и т.п.); - принципы промышленного и гражданского строительства, возможность осуществлять подготовку и читать строительные чертежи и процедуры по строительству; - методы установки, регулировки, модификации и ремонта промышленного и гражданского строительного оборудования; - модуль PM системы SAP «Сахалин Энерджи» в рамках требований, предъявляемых к данной должности; - основы организации технического обслуживания технологических установок, разработка и реализация проекта; - законодательство РФ по труду и охране труда. - вакансия открыта в городе на востоке РФ
Oil and gas company is looking for Logistic Coordinator:
Requirements:
production and organizational structure, types of Company's activities; processes and production modes of the Company; legislative and other normative legal acts of the Russian Federation; methodical and other materials on preservation of the department; forecasting principles in logistics and logistics planning; bases of design of logistic systems; principles of design and creation of logistic systems, formations of logistic communications; logistic information systems and their functions; bases of management, marketing, organization of production, modern business technologies, financial management; bases of the customs and transport legislation; principles of planning of production; economy and the organization of transportation of goods on all means of transport; methods and order of planning of stocks and management of them; requirements to registration of supplying, transport, warehouse, marketing and financial documentation; occupational health and safety, environmental protection rules; means of computer facilities, communications and connections; business communication ethics; Company's labor regulations.
Responsibilities:
operates logistics and purchases (develops plans of purchases; coordinates search of suppliers; directs the analysis of conditions of contracts of deliveries and reliability of deliveries; provides drawing up and timely placement of orders at suppliers; coordinates the conclusion of contracts with suppliers; takes part in definition of types and terms of payments under the signed contracts; will organize interaction with suppliers; provides drawing up of reports; analyzes implementation of orders and results of deliveries; takes part: in production planning; in management of productions; in ensuring high-quality and timely production; in development and introduction of measures for reduction of a production cycle and optimization of expenses for production; in carrying out organizational actions for certification and production registration; operates stocks (analyzes plans of production and reports on their performance; plans volumes of the stocks necessary for process production with coordination with expensive base on storage and service of stocks; coordinates works on calculations of expenses for formation and storage of stocks, expenses on acquisition, on operation of places of storage (rent, payments for power supply, the ave.), routine maintenance (storage, inventory, internal displacement), insurance; estimates expenses and costs for stocks; projects and applies control systems of stocks; models stockpile management schemes; develops methods of the account, an assessment and modeling of stocks; coordinates inventory of stocks; supervises a condition of stocks; operates transportation of the goods, defines a carrier of cargoes, proceeding from the most effective schemes of work of the transport organizations and the most optimum means of transport (according to standards on conditions of transportation of separate types of cargoes), transport tariffs, technical operations, economic and cost indexes of transportation; defines methods and schemes of optimization of transport and technological schemes of delivery of cargoes; provides the conclusion of contracts on transportation, the forwarding and other service connected with transportation of cargoes; develops plans of transportations; will organize technological process of transportation (transfer of cargoes to carriers, control of delivery of cargoes to consignees, coordination of cargo handling works); provides flow of documents of transport and technological process; analyzes quality of transportation and timeliness of delivery of cargoes. organizes customs registration and a customs clearance of the goods (chooses types of customs modes; provides drawing up and timely submission of customs documentation; provides customs declaring and representation on request of customs offices of the declared goods; defines customs clearance points (on border, at internal customs); develops schemes of minimization of expenses for a customs clearance; carries out search of mechanisms of a preferential customs clearance; provides payment of customs payments; operates risks in logistics (provides insurance of the equipment, the goods, raw materials, materials, cargoes, responsibility of carriers; will organize actions for ensuring safety of cargoes at transportation, production at storage and internal displacement; carry out his/her labor activity in Company's interests, following the requirements of corporate policy, and ethical standards of behavior; keep service documentation in order, regularly review the messages received via e-mail and answer them in a timely manner; observe Company's internal labor regulations; observe occupational health and safety rules, environmental protection rules; not disclose information that constitutes confidential information; also other obligations established by acts of the employer and/or expressed by the line manager in verbal form and responsibilities which are outgoing from the nature of the appointment/specialty of employee and the character of carrying out job.
production and organizational structure, types of Company's activities; processes and production modes of the Company; legislative and other normative legal acts of the Russian Federation; methodical and other materials on preservation of the department; methods of working conditions examination in workplaces; organization of work on occupational health and safety; system of standards on occupational health and safety; psycho-physiological requirements for employees on the basis of work severity categories, restrictions on the use of women, and employees transferred to light work; operation specifics of used in the Company equipment; rules and means of monitoring of equipment technical condition conformity to the requirements of safe conducting of operations; procedure and timing of reporting on implementation of measures for occupational health and safety; occupational health and safety, environmental protection rules; means of computer facilities, communications and connections; business communication ethics; Company's labor regulations
Responsibilities:
Control of compliance of objects and the equipment to requirements of norms and rules for labor protection and industrial safety according to the legislation of the Russian Federation. Development of standard documentation: induction program; instructions on department of work on professions and types of works, on safe operation and maintenance; instructing programs on a workplace on department of work, industrial and fire safety for workers; programs of in service training to safe receptions and work methods for workers; production instructions, programs and orders; Implementation of operative and advisory communication concerning labor protection and industrial safety at operation of objects at carrying out checks by bodies of the state supervision and control (The Federal Service for Ecological, Technological and Nuclear Supervision, State Labour Inspection). Control of implementation of instructions of bodies of the state supervision. Participation in investigation of occupational accidents, accidents with extraneous persons, development of preventive actions. Accurate knowledge of procedure of the report and notification of appropriate bodies of the state supervision. providing the Project HSE manager with support on the identification, monitoring and control of the requirements on health, safety and environmental issues deriving from Russian Local regulations, codes, rules and norms; carry out his/her labor activity in Company's interests, following the requirements of corporate policy, and ethical standards of behavior; keep service documentation in order, regularly review the messages received via e-mail and answer them in a timely manner; observe Company's internal labor regulations; observe occupational health and safety rules, environmental protection rules; not disclose information that constitutes confidential information; also other obligations established by acts of the employer and/or expressed by the line manager in verbal form and responsibilities which are outgoing from the nature of the appointment/specialty of employee and the character of carrying out job.
production and organizational structure, types of Company's activities; processes and production modes of the Company; legislative and other normative legal acts of the Russian Federation; methodical and other materials on preservation of the department; labor and pension legislation of the Russian Federation; the structure and staff plan of Company; order of registration, record keeping and storage of work record books and personal files of the personnel; procedure for assigning titles of professions of workers and positions of officers; procedures for personnel changes accounting and compiling of established reporting; procedure for managing Company’s personnel database; occupational health and safety, environmental protection rules; means of computer facilities, communications and connections; business communication ethics; Company's labor regulations
Responsibilities:
enter information on the quantitative, qualitative composition of employees and their movement into the organization's staff database, monitor its timely updating and entering of new data; keep records of employees’ working time: monthly prepare the time-sheets and send it after the approval to the accounting department no later than the last working day of the pay month; keep records of granting leaves to employees, exercise control over the preparation and compliance with schedules of regular leaves; organize rotational personnel change, changing crews; perform daily personnel accounting; inform about arriving and departing personnel; study the causes of staff turnover and participate in the development of measures to reduce it; prepare established reporting documentation; carry out his/her labor activity in Company's interests, following the requirements of corporate policy, and ethical standards of behavior; keep service documentation in order, regularly review the messages received via e-mail and answer them in a timely manner; observe Company's internal labor regulations; observe occupational health and safety rules, environmental protection rules; not disclose information that constitutes confidential information; also other obligations established by acts of the employer and/or expressed by the line manager in verbal form and responsibilities which are outgoing from the nature of the appointment/specialty of employee and the character of carrying out job.
To carry out the design of electrical engineering components of a project or proposal as assigned. Design, implement and monitor the QA/QC management system, in coordination with the company policies, procedures, specifications and instructions, and project participants. Coordinate with company representative(s) on all quality matters. Ddistribute all relevant QA/QC documentation to project participants and to site, Verify and ensure quality related site activities are in accordance with the applicable codes and standards. Organise and participate in the contractor internal and external audits at participant offices and at site, and coordinate all the quality site inspections through the site QC inspectors. Log, monitor and control all non-conformance reports and undertake remedial action, coordinate with the participant QA managers and site construction manager on all quality issues, coordinate and chair all QA/QC meetings.
Qualifications
ISO 9001:2008 training and Auditor Certification. University Degree/ Diploma. Training in MS Office 2007 or above. Training in MS Visio and Adobe acrobat would be an asset. 10-15 years experience as a QA/QC professional, in particular construction site QC. Proven expertise in creating, improving and maintaining Project Quality Systems. Must have strong administrative skills, be well organised and work well under pressure. Attention to detail is a must. Experience and training in MS Office 2007. Must have Russian Experience. Russian language would be advantageous but not essential.
Big company is looking for Senior Electrical Engineer
Main Function within Department
Provide technical and organizational expertise to the project to ensure technical adequacy of electrical engineering. To give technical support to less experienced engineers if appropriate.
Responsibilities
To carry out the design of electrical engineering components of a project or proposal as assigned. To produce/assist in providing project specifications, formulating technical content of requisitions, approval of vendor data and relevant Company drawings and documents. To refer to the Lead Engineer on corrective action as necessary within the team, project or with suppliers to ensure contract compliance. Compliance with all project instructions and company procedures. To ensure any changes in design against project contracts are notified to the Lead Engineer. Report on a regular basis on all matters affecting technical problems to the Lead Engineer. Must be familiar with working in an ISO 9001 Quality Assurance environment and implementing the requirements of that system. Provides technical assistance at vendors’ works during functional testing or site at start-up if this appropriate to the project.
Qualifications
Degree qualified in an engineering discipline. Chartered Engineer. Significant experience in engineering on multi-discipline projects including substantial experience in an engineering discipline lead role. Field engineering experience would be an asset. The Engineering Manager role requires solid organizational, interpersonal and leadership skills with the knowledge and experience to execute the technical scope of multi-discipline projects.
analyzing the contract terms, areas of possible risks and opportunities related to the application of contract clauses; managing and coordinating contract of administration activities, ensuring that all aspects of the contract during the execution phase are addressed with the objective of satisfaction of the contract requirements and contribution to maximize project revenues and minimize subcontract claims and costs; Transfer of originals of contract documents in the proper way, according to applicable procedures; making guarantee that the contract information used by the team of the project is exact and actual; coordinating with the project team, taking part at meetings, investigating project and subcontract issues, reviewing and preparing all correspondence relating to contracts with the Subcontractors and the Client as needed; supervising correctness of implementation of clauses mainly with Subcontractors and then with the Client; supervising work performance according to terms of the contract mainly with Subcontractors and then with the Client; coordinating contractual issues with Subcontractors; carrying out his labor activity in Company's interests, following the requirements of corporate policy, and ethical standards of behavior
Assignment description: Responsible for quantity surveillance activities in various projects (typical: Mariner, Dagny, Aasta Hansten, Bressy and others). The work will include; Preparation of invitation to tender, contract evaluation, budget updates based on forecast from contractors and verification of quantity measurement in projects. International assignment will be expected
Experience from weight control will be an advantage.
Competence requirements: Engineer with at least 5 years experience from quantity measurement. Alternative relevant experience will also be evaluated.
Language requirements: English is the working language
Geographical Office Location: Norway, Oslo /UK/ Asia
Assignment description: Weight Engineer Drilling Module Overall responsible for the monitoring of Contractor weight control to ensure optimal design solutions and early corrective actions. Work closely together with the engineering group to co-ordinate weight engineering activities. • Ensure contractors are performing weight engineering according to procedures and best working practice • Identify associated risk and opportunities, and take part in performing high level of risk assessment • Liaise with company weight control group to ensure consistent weight engineering across the complete project • Assist contractor to produce high quality weight reports and calculations • Manage and coordinate weighing of the Contract Objects • Perform manual checks of engineering weight and CoG information to supplement company discipline weight checks
Competence requirements: Minimum 3-5 years of experience from relevant execution phase projects, preferably with international experience • Extensive knowledge within Statoil governing documentation • Experience with follow-up of engineering/construction contractors • Co-operational and communication abilities • Structured, systematic and target driven with well-defined goals • Multi discipline understanding • High HSE and ethical standards • Ability to handle high work load
Geographical Office Location: Norway, Oslo /UK/ Asia dependent on location of contract to be awarded end 2012
WE ARE LOOKING FOR CONSULTANS WHO CAN MEET THE FOLLOWING REQUIREMENTS:
COMPETENCE: - Experience from engineering within the drilling module and multi discipline understanding is preferable. - Knowledge of the Oil & Gas standards, regulations and requirements in general - B.Sc. in Engineering (or equivalent) - PDMS, Microstation, ProArc, SAP, STID, ProCoSys - knowledge of PDMS(design/spooler), and PDMS work instructions - knowledge of requirements of pipe design, layout and material handling - knowledge about fabrication requirements, isometric production - Strong written communication skills are necessary for drafting fabrication and construction specifications in a piping engineer role.
ASSIGNMENT DESCRIPTION: - Detail engineering on existing and new piping within the drilling module - Weight- and cost estimate - 3D-modeling on existing and new constructions - Isometric pipe drawing production and checking - On-/offshore surveys - Work descriptions and evaluate installation methods - Package management - Installation and commissioning support
A piping engineer’s chief responsibility is to create drawings of how piping systems should work and what materials make up the pipes.
The project is going on in NORWAY. Interested candidates should forward their CV in English . For more information please contact: + 7 812 363 2832 ( St.Petersburg).
Thanks for your cooperation Baltic Group International
Assignment description: - Handling of M5 notifications (changes/errors in system documentation) - Update documentation of automation, electro and instrument systems and equipment (Life cycle information) - Work associated to M5 (TI request) notification. The M5 Notification is used to request and follow up technical information changes triggered by maintenance execution. It should to cover all kinds of information updates. - Update electro and instrument systems and equipment.
Competence requirements: Automation engineer Engineers within electro and/or instrument Experience from engineering within operation and maintenance/projects
Должность в российской компании. На сегодняшний день предприятие оказывает услуги по направлениям инжиниринг‚ управление проектами‚ проектирование‚ авторский надзор для предприятий нефтегазодобывающей‚ нефтегазоперерабатывающей отраслей‚ нефтегазохимических и химических заводов.
Требования:
Высшее образование (Строительные ВУЗы) Наличие опыта работы в проектных организациях / отделах. Наличие успешно реализованных проектов в области промышленного проектирования (проектирование трубопроводов); Знание технологических процессов нефтепереработки и нефтехимии Опыт руководящей работы. Знание программ: AutoCAD‚ PDMS; Наличие опыта ведения расчетов комплектации трубопроводов.
Обязанности:
Организация и осуществление технического и административного руководства отделом;
Контроль исполнения технического задания на проектирование‚ авторский надзор;
Ведение проектов по компоновке объектов‚ обвязка технологического оборудования трубопроводами;
Расчеты компенсации трубопроводов;
Отчетность.
Условия:
Официальное оформление;
Пятидневная рабочая неделя;
Редкие командировки (в случае острой необходимости);
Оклад на период испытательного срока 140000 - 145000рублей.
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
This position is based in Russia. The QA/QC Inspector will be involved in a major power-generation company.
Activities:
• Capital spare part supply services including new and used serviceable parts • Advanced technology component repair services for gas turbine part restoration • Global field services available on both a planned and call-out basis • Gas turbine overhaul services delivered on-site or from certified workshops • Monitoring and diagnostics including predictive maintenance services to improve the performance and reliability of your turbo machinery • Accessory repair programmes for fuel nozzles, end covers, and oil and air systems • Control System design, manufacture, integration and installation services
Context and environment:
• Rotation 28d/28d
Qualifications and Experience required:
Graduate engineer with minimum 7 years experience in the energy and/or oil and gas industry. Fluent in English (speaking and writing) Fluent Russian is mandatory. Good communication skills, able to work in a multicultural environment.
Position: Senior Mechanical Engineer Work Location: Stavanger
Assignment description: Follow up of the discipline cost and plan Discipline acceptance of mechanical documentation Evaluate bids, clarification with vendor and follow up deliveries. Cooperate with Company SQS and purchasing department. Specify documentation, and especially ensure that CopNo specific requirements are met and delivered in accordance with SDRL Contribute to the training of junior personnel
Competence requirements: Long experience, 5 to 10 years, within offshore related projects from one or more of the below listed equipment: • Rotating equipment, • pumps and compressors, • chemical injection skids, • pressure vessels, • Heat exchangers and other related equipment and multidiscipline packaged deliveries. Independent work on multidiscipline projects Knowledge of Ptil requirements, PED and Norsok standards.
Masters or bachelor degree in mechanical engineering Fluent in English both orally and written
Workplace: Stavanger Contract Start: 02.01.13 Contract est. End: 31.12.14
Международная рекрутинговая компания WORLD STAFF ® для своего клиента подбирает высококвалифицированный персонал.
Наш клиент – Крупная Строительная Компания (нефтегазовая отрасль)
Вакансия: ГЕНЕРАЛЬНЫЙ ДИРЕКТОР U325–GD
ОБЯЗАННОСТИ:
• Координация работы менеджмента Компании • Координация работы департаментов Компании • Участие в переговорах с клиентами, первыми лицами компаний • Ведение переговоров и контроль выполнения контрактных обязательств • Контроль работы поставщиков и подрядчиков • Тайм-менеджмент в офисе Компании
ТРЕБОВАНИЯ:
• Высшее образование • Опыт работы от 20 лет в нефтегазовой сфере • Опыт организации деятельности компании • Ответственность, внимательность, высокая трудоспособность • Умение работать с большими объемами информации • Готовность к командировкам и интенсивному графику работы
КОМПАНИЯ ПРЕДЛАГАЕТ:
• Стабильную работу в динамично развивающейся компании • Конкурентную заработную плату • Работа по контракту (Москва, Россия) • Помощь при оформлении необходимых документов, рабочей визы • Компенсационный пакет (мобильная связь, командировочные и т.п.) • Сложные интересные задачи
Направляйте Ваше резюме с фотографией на gp@worldstaff.com.ua с указанием кода вакансии U325 – GD
Международная рекрутинговая компания WORLD STAFF ® - 25 лет в Европе.
Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.
In order to support its growing activities, ANOTECH Energy is looking to hire a new Business Manager for its Russian branch.
Activities:
Sales responsibilities: • Managing business leads in consulting at actual customers • Closing offer deals on a service contracts • Participating to the marketing strategy • Participating and realizing the preparation of offers, reporting ... • Supporting in achievement of commercial objectives and pro-active development of corrective actions • Gathering new business opportunities
Management responsibilities: • Managing a team of consultants • Supervising the financial status of your activity • Organizing & coordinating the commercial relationships with your partners,
HR responsibilities: • Playing an active & consulting role to our recruitment team to optimize our attracting policy • Selecting & recruiting your new consultants team • Being in charge of the consultant career evolution (annual review, training…) • You present an appealing into the Energy sector • You’ve build your career within B-to-B activities
Requirements:
• You have a Master degree or equivalent • You have a good knowledge of Oil and Gas technical fields, • You speak English fluently, • You have a track record in Business development • You have acquired negotiation skills within several sectors • You are a good listener and communicator, convincing and pro-active • You are an autonomous, you can manage your own priorities but you are also a team player keeping a focus on the company’s interests • You feel good with initiative and motivation to reach planned & ambitious goals
Subsea Delivery Team (SDT) handles critical deliveries through our main SPS contractors for well pressure containment components. Our team of materials discipline engineers in SDT have the following responsibilities:
• Act as materials technology discipline engineer in and provide technical expertise to subsea development projects in Statoil. • Ensure that deliveries are according to Statoil’s governing documentation and requirements • Provide assistance in procurement of materials and equipment. Follow-up and quality assurance of critical and new components and materials, welding procedures, manufacturers and suppliers. • Attendance of Kick-off / Pre-Fabrication Meetings on specific qualification activities • Review and comment to Quality Plans and Processes (ITP) • Review and provide comments to (as deemed necessary) to Contractor Qualification Procedures and Specifications. Handling of technical queries and deviation requests. • Review Manufacturing and Testing Reports generated by Contractor. Review of certificates, procedures, and reports (materials, welding, NDT, coating). Audits of contractors and fabrication yards. • Witness critical production steps and testing activities as defined in Contract • Close cooperation with the materials discipline team and discipline ladder.
The position is based in Oslo, however, travelling to Contractors' and sub-suppliers' sites is required.
Competence requirements: University degree: MSc/PhD in materials technology or similar. Documented materials technology and welding competence with knowledge of subsea production systems. Familiarity with Statoil's governing documentation and requirements is advantageous
Personal qualities: • Result-oriented and quality-conscious • Ability to work in a structured and systematic manner • Ability to prioritise tasks • Strong cooperation and networking skills • Commitment to company values, HSE and ethical standards
Job Description / Responsibilities / Должностные функции / обязанности: o Review Engineering documentation on Piping Class Specification for development of WPSs / Обзор инженерной документации по спецификации класса трубных обвязок для разработки ТУ на методику сварки. o Conduct Welding Qualification Testing as per ASTM Codes and ROK Regulations / Проведение квалификационных испытаний сварочных процедур согласно нормативу ASTM и республиканским требованиям. o Organize & Witness Mechanical Testing and upon successful completion of testing, prepare PQRs / Организация и освидетельствование механического испытания и по завершению успешного испытания, подготовка протоколов аттестационного испытания сварочной процедуры. o Welder Training and Welder Qualification Testing as per project specific requirements / Обучение сварщиков и проведение аттестации сварщиков согласно требованиям проектных спецификаций. o Control and Monitor Welding Activities and Welding Data Base, at Project Site / Контроль и мониторинг сварочных работ и базы данных по сварке на проектном участке. o Control and Monitor Weld Defects and impart training to Welders for weld-quality performance / Контроль и мониторинг дефектов сварки и проведение обучения сварщиков для выполнения качественной сварки. o Review of NDE procedures submitted by vendors and subcontractors / Обзор процедур по неразрушающему контролю, представленных поставщиками и субподрядчиками.
Квалификационные требования по образованию, стажу и опыту работы / Qualifying requirements by education & experience:
Educational Qualification / Образовательный Ценз: o Mechanical or metallurgical Engineering Graduate (Diploma or Bachelor Degree) / Проектирование по механике / металлургии (Диплом или Степень Бакалавра) o Internal Auditor certification for ISO 9001:2000 / Сертификат Внутреннего Аудитора по ИСО 9001:2000. o Level-II as per ROK Standard for Specialist in Welding Technology / Квалификация 2-го уровня по республиканскому стандарту по специализации «Технология Сварки» o ASNT Level 2 in RT, UT, PT and MT / Квалифицирован на уровне 2 ASNT по радиографии, ультразвуковому контролю, проникающей дефектоскопии и магнитно-порошковой дефектоскопии.
Experience / Опыт работы: • Experienced in Preparation/Qualification of Welding Procedure in Petrochemical / Oil & Gas Projects / Подготовка / аттестация сварочных процедур по нефтехимическим / нефтегазовым проектам. • Must have worked in International environment on large scale projects in similar position / опыт предыдущей работы в международной организации на аналогичной позиции. • Must be able to prepare and maintain Welding Data Base / Умение готовить и вести базу данных по сварке. • Must be aware of Project certification & handover requirements according to local laws / Знание требований по сертификации и сдаче проекта в эксплуатацию согласно республиканским нормативам. • 8-10 years experience in similar position / 8-10 лет опыта предыдущей работы на аналогичной позиции.
Job Description / Responsibilities / Должностные функции / обязанности: o Review Engineering documentation on Piping Class Specification for development of WPSs / Обзор инженерной документации по спецификации класса трубных обвязок для разработки ТУ на методику сварки. o Conduct Welding Qualification Testing as per ASTM Codes and ROK Regulations / Проведение квалификационных испытаний сварочных процедур согласно нормативу ASTM и республиканским требованиям. o Organize & Witness Mechanical Testing and upon successful completion of testing, prepare PQRs / Организация и освидетельствование механического испытания и по завершению успешного испытания, подготовка протоколов аттестационного испытания сварочной процедуры. o Welder Training and Welder Qualification Testing as per project specific requirements / Обучение сварщиков и проведение аттестации сварщиков согласно требованиям проектных спецификаций. o Control and Monitor Welding Activities and Welding Data Base, at Project Site / Контроль и мониторинг сварочных работ и базы данных по сварке на проектном участке. o Control and Monitor Weld Defects and impart training to Welders for weld-quality performance / Контроль и мониторинг дефектов сварки и проведение обучения сварщиков для выполнения качественной сварки. o Review of NDE procedures submitted by vendors and subcontractors / Обзор процедур по неразрушающему контролю, представленных поставщиками и субподрядчиками.
Квалификационные требования по образованию, стажу и опыту работы / Qualifying requirements by education & experience:
Educational Qualification / Образовательный Ценз: o Mechanical or metallurgical Engineering Graduate (Diploma or Bachelor Degree) / Проектирование по механике / металлургии (Диплом или Степень Бакалавра) o Internal Auditor certification for ISO 9001:2000 / Сертификат Внутреннего Аудитора по ИСО 9001:2000. o Level-II as per ROK Standard for Specialist in Welding Technology / Квалификация 2-го уровня по республиканскому стандарту по специализации «Технология Сварки» o ASNT Level 2 in RT, UT, PT and MT / Квалифицирован на уровне 2 ASNT по радиографии, ультразвуковому контролю, проникающей дефектоскопии и магнитно-порошковой дефектоскопии.
Experience / Опыт работы: • Experienced in Preparation/Qualification of Welding Procedure in Petrochemical / Oil & Gas Projects / Подготовка / аттестация сварочных процедур по нефтехимическим / нефтегазовым проектам. • Must have worked in International environment on large scale projects in similar position / опыт предыдущей работы в международной организации на аналогичной позиции. • Must be able to prepare and maintain Welding Data Base / Умение готовить и вести базу данных по сварке. • Must be aware of Project certification & handover requirements according to local laws / Знание требований по сертификации и сдаче проекта в эксплуатацию согласно республиканским нормативам. • 8-10 years experience in similar position / 8-10 лет опыта предыдущей работы на аналогичной позиции.
The Mariner Project is a heavy oil field development on the UK continental shelf. The project is planning for a DG3 in November 2012, EPC contract awards in December 2012 and first oil end of 2016. The concept consist of a large PDQ platform (Process, Drilling and Living Quarter), topside weight approx. 31 000 ton, a jacket substructure, a ship shaped FSU for storage and offloading and infield pipelines and cables. Gas for power generation and light oil for dilution of the heavy oil will be imported. A new operation centre will be established in Aberdeen.
Electrical/Instrument Engineer Drilling Facilities - Mariner Project: •Follow up Contractor’s engineering activities to ensure that the design comply with UK authorities and the company’s requirements for installation, operation and maintenance of electrical and instrument installations •Ensure that Contractor focus on quality, cost and weight optimal solutions, in time delivery, as well as fulfilling the LCI requirement •Identify and evaluate change proposals, and None Conformance Requests related to design •Verification of Contractor’s documents as required and monitor technical quality in engineering design activities
Competence requirements: •Good knowledge of Drilling Control Systems •Minimum 6 years of experience from relevant execution phase projects, preferably with international experience •Extensive knowledge within the company’s governing documentation •Knowledge of UK regulations and requirements •Experience with follow-up of engineering/construction contractors •Co-operational and communication abilities •Structured, systematic and target driven with well-defined goals •Multi-discipline understanding •High HSE and ethical standards •Ability to handle high work load •Mobile
Language requirements: English
Workplace: Onshore, with periods offshore; Norway (Oslo or Stavanger from the start/Q2 2013), UK or Asia (location and rotation will be clarified after the project have been awarded)
1. Act as Vessel Representative onboard vessels performing various work for Statoil. (survey/inspection, rock installation, dredging/trenching, light construction, laysupport, geotechnical drilling/sampling, metocean, etc). 2. Preparations/follow up/QC work in Statoil’s offices related to activities in point 1.
Responsibilities/tasks: • Represent and be Statoil’s single point of contact onboard • Ensure the work is performed in a safe and efficient manner, to the required quality, and according to workscope and HSE requirements • Participate in HSE activities (Hazops, SJAs, etc) • Report/communicate with Statoil’s land organization and offshore installations • Act according to Statoil values, and contribute with good HSE culture • Promote, behave according to and comply with systems and requirements • Quality control of data/reports
Successful candidates must be willing to work both onboard the vessels and in Statoil’s offices
Competence requirements: • Relevant HSE qualifications and experience. • Experience/competence in survey/seabed intervention work and other work as listed above, incl. QC of such work. • Familiar with data QC and software tools.
Language requirements (if essential for the work): English
Comments on rotation: Dependent on vessel schedule/activity
Workplace: Offshore, with periods onshore Stavanger
Function • Work with SALSA software. Check the inputs (Purchase requisitions, Purchase/Service orders, contracts, good receipts, invoices…) in accordance with the established procedures. • Verify the legitimacy of costs and correct cost allocation. • Ensure the preparation of cost control documents: collect, centralize, process and transmit financial information in accordance with the established procedure. • Process data in Salsa (PR, Call-off, GR for services…) in accordance with the existing procedures. • Prepare and comment monthly cost control reports to evaluate the actual costs vs budget for Technical Responsible and Budget Holder. • Organize monthly cost control meetings with the corresponding departments to analyze the operations progress and prepare updates of the Estimated Final Cost (EFC). • Analyse the evolution of results against objectives with identification of the causes of deviation for Management information and Budget update. • Take part in the preparation of yearly budget in accordance with the business plan, and in budget revisions (Closure Forecasts) for the corresponding departments’ delegated budget. • Prepare RFSs in STAR (Head Quarters services). • Prepare monthly Cash Calls for the Departments activities. • Participate in answers preparation (related to DO cost control) during Audits: KPSA audit, Partners audit etc. • Participate in preparation of answers and details for subcommittees (in relation of Budget and actual cost). • Ensure the internal interface with the Accounting team and external interface with the suppliers/providers of services (pending invoices, payments…). • Technically support Budget Control team on request. • Contribute to firmly establish management control and develop a cost-control culture in the Company.
Accountabilities • Roughly 30 contracts per year and 2000 invoices per year. • Ensure transparency and audibility of operations accounting. • Ensure conformity of all Operations costs to the approved cost control procedure. • Ensure correct cost allocation. • Produce, issue and share cost control reports. • Assist in providing correct budgets and cost estimates.
Requirements • University degree in finance or accounting, technical background should be appreciated. • Good communication skills, orderliness. • At ease with MS Office software, SAP. • Fluent English.
Company The Company delivers science-based solutions for markets that make a difference in people’s lives in food and nutrition; health care; apparel; home and construction; electronics; oil-and-gas; and transportation.
Work location: Moscow
Position Consultant (Energy Efficiency)
Function
• Conducting energy management system evaluations, comparing client’s actual performance to the company or benchmark criteria for achieving excellence; in some cases, performance is compared to regulatory criteria. • Preparing written reports, which meet quality and timing standards. Developing, with the client, a prioritised action plan based on the evaluation findings. Delivering various implementation assistance services, training, developing procedures, transfer the company know-how into solutions for the client, etc. • Coaching client management • Facilitating client management system processes including , for example , project management office meetings • Monitoring client progress against the action plan. • The Energy Efficiency Consultant will also support business development managers in developing client relationships and to develop a deep understanding of client business problems and needs, translating them into high value solutions.
Requirements • BS/BA or equivalent in a relevant technical degree is preferred. However consideration would be given to candidates with extensive industry experience. • At least 6 years of professional experience in energy efficiency consultancy in customer facing roles. • Ideally also operations experience including direct supervisory responsibility, preferably in a corporate Energy Strategy or Energy Efficiency role. • Ideally, industry experience in one or more of our key client areas of activity: oil and gas, metallurgical, manufacturing, mining. • Ability to travel extensively up to 60 % of monthly time. • Fluency in both written and spoken English and Russian • Ability to relate to and inspire client’s personnel, including senior management. • Listening skills for facts and subtleties. • Communication skills: verbal, presentations and written reports, to all levels of an organisation. • Ability to work in different teams playing different roles. • Adaptability/Flexible: address needs as they arise versus following a rigid process. • Ability to manage conflicts, reach consensus. • Analytical ability: evaluate findings, identify underlying problems and come to practical solutions.
Function • Develop and maintain weekly detailed Master Construction Schedule (for each construction function like mechanical, civil, electrical, instrumentation etc.), post it to EDMS • Collect, analyze & update contractor’s schedules • Develop recovery schedules • Prepare and update Critical Path Analysis • Perform Contract Cost analysis • Responsible for earned value & variance analysis reporting • Collect daily progress reports from Contrators, get them approved, scan and save to EDMS • Update Resource Idleness Sheet, 95% Punch point sheet etc. • Control the daily site manpower and manhours lost (for Company and Contractor’s staff), update corresponding data-sheets • Prepare and update contractor manpower histogram (both planned and actual) for the entire construction schedule period • Follow and control on all the FCNs (Field Change Notice) and DCNs (Design Change Notice) • Participate in progress meetings & track action items • Participate in daily meetings for Company Construction staff (daily plans updating) • Preparation of Daily Site Report (collecting info from Contractors, Contractor’s PCEs, Company Engineers etc.), save report to the EDMS • Participate in Weekly meeting with Contractor • Prepare Weekly meeting agenda construction report, save it to EDMS • Prepare monthly project reports • Oversee/supervise the on-site document control function • Provide monthly construction progress, cost safety, constraints etc. Inputs to office Project Controls Engineer and Project Manager for monthly portfolio review meeting
Requirements • Strong communication skills in Russian and English • MS Project 2010 (2007) advanced user • MS Excel advanced user • Fast learner • Willing to travel at least 20 % of your time • Results driven team player able to communicate accurately • Strong problem solver and the ability to work, analyse and solve problems independently • The ability to learn quick and apply new concepts, skills and knowledge to assign tasks
• 10+ лет опыта работы в эксплуатации объектов наземной инфраструктуры нефтегазового комплекса; • Высшее техническое образование по направлению – нефтегазовое дело; • Знание принципов ценообразования при строительстве объектов наземной инфраструктуры, и операционных затрат связанных с эксплуатацией этих объектов; • Знание технологий сбора, подготовки и перекачки нефти и газа, поддержания пластового давления; • Опыт работы с предпроектной и проектной документацией; • Опыт работы со сметами на строительство объектов нефтегазового комплекса; • Опыт выполнения оценки инвестиционных проектов; • Знание английского языка приветствуется.
Основные обязанности:
• Разработка методов и подходов оценки стоимости объектов наземной инфраструктуры на этапах концептуального проектирования; • Анализ смет по реализованным крупным и капитальным проектам, формирование и сопровождение базы данных укрупненных стоимостных показателей для объектов наземной инфраструктуры; • Оказание методологической и консультационной поддержки нефтегазодобывающих предприятий Компании в процессе оценки планируемых затрат на развитие наземной инфраструктуры; • Экспертная оценка планируемых затрат в долгосрочных и краткосрочных бизнес - планах по развитию наземной инфраструктуры и при разработке предпроектной документации; • Разработка и модернизация методов оценки совокупной стоимости владения нефтепромысловым оборудованием.
Роль Обеспечение своевременного и качественного удовлетворения потребностей крупного проекта в материально-технических ресурсах (МТР) и сопутствующих услугах. Достижение коммерческой эффективности процесса закупки МТР для крупного проекта.
Основные обязанности Работа в закупочных и секторных группах по направлениям деятельности: Разработка, согласование, утверждение и реализация стратегий закупок в секторе. Прогноз и анализ спроса и предложения, сегментация потребности. Мониторинг исполнения интегрированного графика поставки МТР в секторе. Проведение предварительной квалификации поставщиков в секторе. Обеспечение и поддержание конкурентной среды на рынке. Анализ рынка подрядчиков и мониторинг изменений долей рынка и уровня цен. Организация технических аудитов действующих и потенциальных поставщиков. Организация проведения опытно-промышленных испытаний инновационного оборудования в рамках программ повышения эффективности применяемого оборудования. Обеспечение крупного проекта МТР: обработка потребности и анализ технических заданий Заказчика на предмет полноты изложенных требований и отсутствия прямых ссылок на производителей. своевременная и качественная разработка тендерных пакетов в части подготовки письма-приглашения, формы оферты и приложений к ней. направление технических предложений поставщиков на оценку Заказчику, получение результатов технической оценки, проверка результатов на предмет объективности и согласование результатов с профильными подразделениями Компании. подготовка рекомендаций по выбору поставщиков на основании анализа коммерческой и технической оценки. достижение коммерческой эффективности, определенной долгосрочной и консолидированной краткосрочной стратегией контрактования. обеспечение минимального времени на закупку МТР с момента получения потребности, до момента заключения договора поставки. закупка сопутствующих услуг: таких как комплексное экспедирование грузов, шеф-монтажных и пуско-наладочных работ, обучение персонала подрядчика. Обеспечение соответствия графиков поставок МТР и услуг по шеф-монтажным и пусконаладочным работам. разработка стратегий переговоров. Договорная работа и контроль за исполнением договоров. Проведение экспертизы инвестиционных проектов в рамках сектора. Подготовка отчетов. Финансово-экономическое обеспечение деятельности.
Требования к кандидатам Образование: Высшее техническое / экономическое - Знание принципов организации материально-технического снабжения крупной нефтяной компании - Знание основ производственного и технологического процесса в нефтедобыче и нефтепереработке - Знание рынка по направлению деятельности - Наличие контактов по направлению деятельности - Опыт проведения тендерных мероприятий - Умение взаимодействовать с контрагентами в интересах Компании - Знание принципов и методов управления - Знание эффективных методов проведения переговоров; - Опыт и навыки проведения мониторинга рынка; - Умение взаимодействовать с контрагентами в интересах Компании - Наличие лидерских качеств и компетенций Русский – свободно Английский – свободно Опыт работы: Не менее трех лет на аналогичной должности Не менее пяти- семи лет в отрасли Знание программного обеспечения: Опытный пользователь (Microsoft Office, Microsoft Project, Visio, SAP R/3, Lotus, IE).
Особые требования Степень мобильности: Высокая Другое: - Стрессоустойчивость - Высокая степень мобильности - Коммуникабельность - Организаторские способности - Умение работать в команде - Наличие аналитических способностей - Способность к управлению коллективом и бизнес-процессами - Способность к быстрому обучению новым программным продуктам - Исполнительность - Нацеленность на результат
Position: Mechanical Commissioning Engineer Number of position: 1 Position category: C1 Discipline Engineer Job start date: ASAP Estimated job end date: 2-4 years Location: Fornebu (2012), Stord (2013-2014) and offshore (2014-2015)
Responsibilities / essential functions of the job:
• Commissioning Engineer for HVAC Systems & Other associated Mechanical systems. • Apply for permission for commissioning for commissioning activities that require authority approval. • Setting of boundaries for systems and commissioning packages (part systems). • Arrange/attend criticality assessment activities according to COPNO procedure 6258. • Follow-up of design and procurement activities, documents and packages within the system(s) they are responsible for. • Validate vendors FAT and EFAT procedures for testing of vendor equipment. • Attend and follow-up of Mechanical Completion and FAT / EFAT on critical supplier equipment packages. • Develop Commissioning and Start-up procedure(s), and if required Performance/Capacity test procedures. • Provide input to the commissioning plan/schedule, including supplier’s assistance, regular updating and maintenance of the commissioning activities within their system(s). • Carryout pre-energizing/pressurizing commissioning and start-up safety review(s) and HSE risk assessment. Identify major Hazards and if relevant develop an appropriate mitigation actions plan. • Ensure provisions and facilities for a safe and efficient commissioning and start up. • Ensure provisions and facilities to maximize onshore commissioning. • Follow up of the MC verification and commissioning activities on the onshore construction work. • Follow up of the MC verification and commissioning activities on the offshore modification work. • Manage the permit to work system within their system(s). • Give input to project training program. If needed, arrange necessary training sessions/courses for project personnel working on their equipment and system(s). • Supervise commissioning, vendor and contractor personnel during commissioning. • Ensure all work is performed to current relevant Statutory regulations, International & Norwegian Industry Standards, including the Company Specifications and Standards/NCPMS. • Ensure Commissioning Procedures are updated and maintained with the latest information. • Ensure throughout the commissioning phases that "Red Line Mark-ups" are filed and transmitted for "As Building" in a controlled and orderly manner. • Ensure relevant and correct input of completion status for commissioning activities into computer based completion system (PCS system). • Provide and maintain engineering and supplier documentation as required by the commissioning group. • When commissioning has started, ensure that all changes or modifications made by engineering and/or suppliers are filed and transmitted in a controlled and orderly manner.
Required Skills*: (Education/Competencies)
• Chartered Engineer, Engineer (BSc) / Technical school or equivalent education/experience related to Instrumentation and/or Control Systems. • Minimum 10 years of relevant Mechanical Engineering experience (offshore and onshore, oil and gas industry). Commissioning Experience is highly recommended.
Assignment description: Technical Compliance Lead will report to Technical Manager. The following responsibilities and tasks will be included in the Job Description:
• The Technical Compliance Lead shall work in the Technical Home Support organization. The Technical Compliance Lead shall cooperate with other parts of the Mariner project, i.e. follow-up team for Process and Utility modules, LQ module, Drilling Module, Jacket and FSU. • The Technical Compliance Lead must have good knowledge of the UK Authority requirements for all parts of the Facility project • The main responsibility is to ensure that the design is developed and aligned with Authority requirements for all parts of the Facility project. • High focus shall be made to advisory service towards site teams in addition to monitoring and verification activities. • Advising in handling of NCRs and DISPs with relation to authority requirements. • The Technical Compliance Lead shall be a contributor in the RISKs process. • Continuously search for experiences from other relevant projects and professional ladder, as well as be active in providing experience to others. This includes establishing proposals for improvements of governing documents in Docmap and Aris.
Competence requirements: • Relevant university degree • Minimum 10 years of experience from relevant execution phase projects for Facilities located at UK continental shelf • Knowledge within Statoil governing documentation • Experience with follow-up of engineering/construction contractors • Co-operational and communication abilities • Structured, systematic and target driven with well-defined goals • Multi discipline understanding • High HSE and ethical standards • Ability to handle high work load • Mobile
Language requirements (if essential for the work): English Workplace: Onshore, Fornebu. Some business travel to other locations must be expected.
Assignment description: The following responsibilities and tasks will be included in the Job Description:
System design and functionality, specification and preparation for completion and commissioning. Coordination of the discipline activities within the area of responsibility. Work in the follow-up team for the EPC contract for the Process and Utility area and cooperate with other parts of the Mariner project, i.e. Drilling, Jacket and FSU, as well as the Home support team. The technical team members shall establish close dialog with relevant Contractor personnel, and with Statoil’s project team members. Contribution to development of a open and good working environment is considered as very important. The responsibility includes ensuring that the design, within own area of responsibility, is developed and aligned with Authority requirements, other relevant requirements, and the professional ladder. Ensure that Contractor focus on quality, cost and weight optimal solutions, in time delivery, as well as fulfilling the LCI requirement. Discipline RISKs shall be established and contribution shall be made to the project overall RISKS. The RISK registers shall be updated on a regular basis. Plan shall be made for following up Contractor’s work based on the identified RISKs. The plan shall include recordable activities and verifications. High focus shall be made to proper handling of interfaces. Identify and evaluate change proposals, and None Conformance Requests related to design. Continuously search for experiences from other relevant projects and professional ladder, as well as be active in providing experience to others. This includes establishing proposals for improvements of governing documents in Docmap and Aris. The working place will mainly be at the contractor’s site for the Mariner project.
Mariner Project is a heavy oil field development on the UK continental shelf. The project is planning for a DG3 in November 2012, EPC contract awards in December 2012 and first oil end of 2016. The concept consist of a large PDQ platform (process, drilling and Living Quarter), topside weight approx..31 000 tonne, a jacket substructure, a ship shaped FSU for storage and offloading and infield pipelines and cables. Gas for power generation and a light oil for dilution of the heavy oil will be imported. A new operation centre will be established in Aberdeen. The Bressay project is very similar to the Mariner projet but the DG2 decision i expected next year in 2013.
*Geographical Office Location for the Mariner Project: Norway /UK/ Asia *Geographical Office Location for the Bressay Project: Oslo
Competence requirements: B.Sc. or M.Sc Minimum 10 years of experience from relevant execution phase projects, preferably with international experience
Personal qualities: Experience with follow-up of engineering/construction contractors Co-operational and communication abilities Structured, systematic and target driven with well-defined goals Multi-discipline understanding High HSE and ethical standards Ability to handle high work load Mobile
Language requirements: English
Workplace: Bressay: Oslo, with some travel Mariner: Is not yet decided (depends on EPC)
Позиция Менеджер отдела строительной экспертизы и стандартизации
Обязанности • Экспертиза проектно-сметной документации для российских и международных проектов в части строительных решений.
• Анализ практики применения и привлечение передовых международных практик проектирования в части строительных решений, конструкций и материалов.
• Проведение строительной экспертизы основных технических решений, предпроектной, проектной и рабочей документации на строительство объектов обустройства месторождений нефти и газа, в т.ч:
• Выполнение проверочных инженерных расчетов строительных конструкций и решений. • Анализ обоснованности принятых строительных решений условиям строительства. • Анализ принятых строительных решений и используемых материалов с точки зрения обеспечения конструктивной надежности и удобства исполнения. • Сравнительный анализ эффективности (в т.ч. экономической) принятых строительных решений. Рассмотрение альтернативных вариантов. Выработка предложений по оптимизации. • Анализ соответствия принятых строительных решений материалам инженерных изысканий. • Анализ соответствия принятых строительных решений требованиям нормативно-технической документации и техническому заданию. • Проведение экспертизы материалов инженерных изысканий на предмет полноты и качества для принятия необходимых строительных решений. • Проведение экспертизы проектов организации строительства и проектов производства работ на соответствие технологии строительства и обеспечения выполнения конструктивных и строительных решений в соответствии с проектной документацией. • Выявление, изучение и сопровождение внедрения инноваций в строительстве с учетом передовой мировой практики (конструкции, материалы, технологии, техника).
Требования • Образование: Высшее профессионально-техническое образование в области промышленного и гражданского строительства. • Опыт работы в области промышленного или гражданского строительства не менее 10 лет. • Опыт работы в области проектирования строительных конструкций и сооружений не менее 5 лет.
• Опыт работы в зарубежной компании обязателен.
• Опыт работы за границей является существенным преимуществом.
• Рабочий уровень английского языка обязателен. • Опытный пользователь: MS Office (Microsoft Excel, Microsoft Word, Microsoft PowerPoint), AutoCAD, ЛИРА-САПР (Staad Pro, Tekla, Autodesk Robot Structural). • Общее знание программных продуктов (желательно): MathCad (MicroFe) CivilDesigner (PLAXIS,CREDO,AutoCAD Civil). SMART Plant CADworx, PDS/PDMS, xSteel (StruCad, AutoCAD Structural) MatLab Primavera (MSProject). • Ключевые навыки: экспертизы проектной документации на строительство на соответствие нормативно-технической документации, техническому заданию и техническим условиям; выполнения инженерных расчетов строительных конструкций и сооружений для наземной инфраструктуры; технико-экономического анализа технических решений; •разработки объемно-планировочных решений; работы в команде; ведения деловой переписки; подготовки презентаций и графических материалов.
Functions • Conduction of construction expertise of main technical solutions, pre-feed, feed and engineering documentation for the construction of surface facilities for oil and gas, including: • Performing validation of engineering calculations of building structures and solutions; • Analyzing the validity of the building construction solutions; • Analyzing taken construction decisions and the used materials in terms of providing structural reliability and ease of execution; • Benchmarking the efficiency (including economic) of taken construction decisions. Consideration of alternative variants. Development of proposals for optimization; • Analyzing the conformance of taken construction solutions with engineering surveys; • Analyzing the conformance of taken construction solutions with requirements of standard technical documentation and technical task; • Carrying out an expertise of engineering survey to check for completeness and quality and to take necessary construction solutions; • Carrying out an expertise of the construction project and projects of work performance for compliance of construction technology with enforcement of design and construction solutions in accordance with the design documentation; • Identifying, researching and supporting innovations implementation in construction with the best international practices (design, materials, technology, equipment).
Requirements • Education: Graduate of higher technical institution in the field of industrial and civil construction; • Experience in the field of industrial and civil construction at least 10 years; • Experience in the field of structural design and construction of at least 5 years;
• Experience in foreign company is the important requirement;
• Experience in working abroad is the valuable advantage;
• Working level of English is the important requirement; • Advanced user: MS Office (Microsoft Excel, Microsoft Word, Microsoft PowerPoint), AutoCAD, LIRA-CAD (Staad Pro, Tekla, Autodesk Robot Structural); • General knowledge of software (optional): MathCad (MicroFe) CivilDesigner (PLAXIS, CREDO, AutoCAD Civil). SMART Plant CADworx, PDS / PDMS, xSteel (StruCad, AutoCAD Structural) MatLab Primavera (MSProject); • Key skills: expertise of project building documentation for compliance with technical standards, technical requirements and specifications; perform engineering calculations, construction of structures and facilities for ground-based infrastructure; technical and economic analysis of technical solutions; development of volume planned solutions; teamwork; business correspondence; preparing presentations and graphic materials.
Conditions • Competitive salary; • Accommodation; • Full medical insurance including family; • Helping with school and kindergarten; • Bonuses.
Инженер по технической поддержке клиентов (нефтеперерабатывающая и нефтехимическая промышленность)
Компания занимается разработкой технологий для химических и нефтеперерабатывающих компаний, необходимых для осуществления процессов нефтепереработки, таких как каталитический риформинг, каталитический крекинг, гидроочистка, процесс Клауса, гидрирование, осушка…
Основные обязанности:
* Взаимодействие с клиентами компании по техническим вопросам; * Сбор информации, касающейся замены катализаторов, проектов строительства новых установок, запросов, которые рассматриваются непосредственно в офисе или направляются в департамент процессов и лицензий Головного офиса; * Сбор всех технологических показателей установок и мониторинг работы катализаторов согласно требованиям департамента технического содействия Головного офиса; * Технические презентации катализаторов существующим и потенциальным заказчикам; * Помощь инженерам, отвечающим за продажи; * Обеспечение непрерывного обмена информацией с клиентами по телефону.
Основные требования:
* Высшее образование (желательно инженер-химик, химик-технолог); * Владение английским языком; * Знания каталитических процессов нефтепереработки; * Опыт работы на НПЗ приветствуется; * Готовность к командировкам (10-20%)
