Нефтяные вакансии

Requirements:
Under the direction of the Lead Piping Engineer, the Piping Stress Engineer shall:

- Have at least 10 years industry experience
- Be able to determine criticality factors for analysis based on the project Basis of Design.
- Develop the critical line list and stress analysis working procedures
- During early phases of project execution the Stress Engineer shall provide technical assistance to the Designers in the shaping of geometric piping configurations.
- Knowledge of proprietary software required. Preference is with Caesar II
- Prioritisation of work shall be consistent to direction provided by the Lead Piping Engineer.
- Planning of analytical work.
- Accountable for man-hours.
- Be able to work with RDI directly, supervising where required and checking their results to ensure project compliance.
- Experience in co-ordination / review / progress reporting of deliverables.
- Will have Russian construction experience.
- Advantage to have piping design experience outside of Russia
- Will likely have been a stress piping engineer on a previous significant project
- Will need to have prior work experience of working with RDI's on FEED and TEOC work
- Good English; written and spoken
- Knowledge of Russian and international standards and codes
- Will have worked with and in International companies
- Willing to work in Moscow and Samara locations.
- Some travel to Irkutsk
- After 3 months the work will be in Moscow and another 9 (or more) months the work will be fulfilled in Samara or other region.
Salary level - 5500$

Please send your CV at tsergey@brunelcr.ru

E-mail: tsergey@brunelcr.ru
Тема письма:

Requirements:

• English – fluent.
• Engineering graduate with minimum 5 years experience. (in oil and gas)
• Knowledge of GOST standards, International specifications and codes.
• Computer Literate
• Knowledge of Engineering and Projects documentation.
• Awareness of various project procedures.
• Excellent coordination and, monitoring skills.
• Good Communication skills.
• Analytical skills.
• Cost consciousness

E-mail: katerina@fircroft.ru
Тема письма:

Responsibilities:
• Develop and implement cost-effective corrosion management strategies
• Analyse corrosion monitoring data and inspection data, and initiate
corrective work as required
• Ensure alignment between corrosion risk strategies and inspection and
maintenance strategies for static equipment

Requirements:
• Good knowledge in English
• Engineering Degree
• Minimum 5 years oil and gas corrosion and inspection experience
Rotational work in Tyumen region 28/28 days.

Company offer: good social package (Medical insurance is provided for company employee and immediate family members, Life and accident insurance for employer, Lunch at Company. premises). Salary is negotiable – level 3500-4200$.

Please send your CV at tsergey@brunelcr.ru

E-mail: tsergey@brunelcr.ru
Тема письма:

Responsibilities:
- conducting Health Safety and/or environmental audits and inspect well services operation (drilling, workover, frac, completion) within geographic area of responsibility Ensure a safe working environment and in compliance with Russian regulatory laws.
- Specilaist will be required to develop procedures based on regulatory and/or client requirements.
- Specialist will present information and respond to questions or concerns from employees, managers, clients and the general public. Handle special projects, as assigned.

Requirements:
HSE (health, safety, environment) specialist:
- Thorough understanding of regulations and the regulatory process. Excellent analytical skills.
- Excellent verbal and written communication skills. 2+ years experience.
- May require professional certifications.
- Available for rotation 28/28 to oilfield in Western Siberia.

Company offer: good social package (Medical insurance is provided for company employee and immediate family members, Life and accident insurance for employer, Lunch at Company. premises). Salary is negotiable – level 1500-2200$.

Please send your CV at tsergey@brunelcr.ru

E-mail: tsergey@brunelcr.ru
Тема письма:

Job Purpose: To develop well design and layout optimizing the investments and applying the highest standards of engineering integrity, safety and environmental protection. To draft drilling plan and support its execution providing engineering advise, and updating, when necessary, well design and execution plans.

ROLE DEFINITION:
Main responsibilities:
- Overall technical integrity of well design and execution plan
- Cost effectiveness of well design and drilling program

Key activities:
- Planning and engineering drilling operations in order to achieve technical objectives in safe, efficient and cost effective manner
- Preparing drilling programs including all information as specified in Company procedure
- Preparing estimated cost breakdown of wells to be drilled or worked over
- Operations follow-up
- Recommending changes in some aspects of drilling program (if necessary) to improve drilling and completion methods, techniques and speed.
- Making recommendations when drilling problem occurs
- Tracking and benchmarking drilling performance and costs
- Preparing post well reports
- Carrying out special studies and reports on any aspects of drilling and completion operations as required.
- Providing digital data useful to follow up well operations and produce well profile print-outs and overpressure study. To critically study these data, detect anomalies and propose corrective actions if needed.
- Assisting rigsite operations for specific jobs
- Assisting in the preparation and evaluation of tenders

QUALIFICATIONS
[b]Education - Engineering degree or high school diploma
Training and Courses:[/b]
- Basic Oil
- Drilling & completion course
- Drilling & completion engineering course
- Geology & Geophysics basic course (preferred)
- Subsurface & Reservoir basic course (preferred)

Languages -Fluent knowledge of English

EXPERIENCE & COMPETENCIES:
Required Experience: -7/8 years of Oil & Gas Industry experience - 5 years of drilling engineering experience]

Required knowledge, technical or professional skills:
- Drilling Activities: Drilling Operation, Mud Line Suspension, Horizontal Drlg, Dril.Fluids&Cement&Cem.Op.Design/Operat., Well drilling experience
- Advanced Drilling: Lean Profile, Underbalance Drilling, Coil Tubing Drilling
- High Profile Drilling: Extended Reach Drilling, Hp/Ht Drilling, Simultaneous Drilling, Wellbore Stability/Sand Production/Prediction&Control

E-mail: tsergey@brunelcr.ru
Тема письма:

ROLE DEFINITION

Main responsibilities
Overall technical integrity of static and rotating equipment design
Selection of the best technical/economical solutions for production facility rotating equipment
Rotating equipment overall design integrity and compliance with international standards, company guidelines and engineering best practices

Key activities - Preparing vessel and machinery concept definition and basic design
- Evaluating contractor proposals
- Preparing vessel an piping project execution plan
- Execution monitoring
- Performing power stations, compressor island stations, pumps, turbines and other dynamic equipment concept design and/or detailed engineering design
- Preparing ITT documentation and bid technical review for rotating equipment
- Reviewing contractors rotating equipment design
- Supporting rotating equipment commissioning and production start-up

Main Internal Interfaces
- HSE Specialist, Corrosion Specialist
Main External Interfaces
- Joint ventures partners for technical review
- Contractors
- Static & Rotating equipment suppliers
- Technical advisors

QUALIFICATIONS

Education: Engineering degree or Technical Diploma
Professional Qualifications
--Training and Courses
- Petroleum Engineering
Languages – Good knowledge of spoken and written English

EXPERIENCE & COMPETENCIES

Required Experience
- 7 years of Oil & Gas Industry experience
- 5 years of static & rotating equipment engineering experience

Required knowledge, technical or professional skills
- E&P Management (Generic)
- E&P SW Use & test (Generic)
- Economics General (Generic)
- Contracting (Generic)
- Techn.Specific. & Bidding (Generic)
- Specialist Knowledge: Engineering knowledge in the specialist activity
- Organisation Processes: Company / Corporate organization, Internal Standard, Project Management process, Suppliers qualification methodology and techniques, Feed-back development and diffusion, Technical audit and Design Review, Work team management methodology, "Internal client" organization process, Documentation management, Site Management, Site Materials and equipment organization, Site accountancy, Project Procurement Management, Contracting Strategy, Contract Management
- Supports and technologies: Standard ISO, TQM and Quality system, Technical requirement and Standard, Information Integrity System and information process support SW
- Compliance: Mining Legislation, Local/National and International Standard and Codes, Health, Safety, Environment, Quality, Tender procedure
- Plant Design: Utilities Design, Mechanical Design, Piping Design, Cryogenic Plants Design, Water Injection Plants Design, Facilities R&D,
Revamping and Upgrading Plants, Contractor's Documentation
- Construction & Installation: Installation , Offshore Installation Supervision, Plant construction, Inspection and testing;
- Project Management: Project Feasibility, Prep. of Devel. Program & Budget, Project Planning, Risk analysis, Data Books, Oper. & Decom. Manual,
Close-Out Report Preparation, Cost control - Budgeting, Project Management methodologies and techniques, Risk Management

Required personal capabilities:

- Problem Solving
- Flexibility
- Innovation
- Decision Making
- Communication

E-mail: tsergey@brunelcr.ru
Тема письма:

Candidate should be available for rotation 28/28 to oilfield in Western Siberia. Salary level – 1500-2000$ per month.

E-mail: tsergey@brunelcr.ru
Тема письма:

Основные обязанности:
• Проведение инженерной экспертизы в отношении коррозии и материалов для подразделений компании (инженерных, производственных, обслуживающих).
• Разработка и внедрение эффективных поправок и технических приемов с целью контроля коррозии эксплуатируемого оборудования в пределах допустимых стандартов.
• Оценка эффективности альтернативных антикоррозийных химических обработок и антикоррозийных веществ.
• Участие в реализации долгосрочных проектов, связанных с материалами, предотвращением коррозии.

Основные требования:
• Законченное высшее или среднее техническое образование (предпочтительно, в области электрохимии, химии, металлургии и материаловедении, механике).
• Опыт работы не менее 5 лет в сфере антикоррозийной обработки и контроля качества материалов.
• Опыт в оценке рисков и методах устранения коррозии.
• Свободное владение английским языком (разговорный и письменный).
• Готовность к вахтовому методу работы (28/28 дней).

Компания предлагает:
Высокий уровень заработной платы; полный социальный пакет, включающий полис ДМС. Компания компенсирует расходы на проживание и питание во время рабочей вахты. Работа в соответствии с Трудовым кодексом РФ.

Отправляйте свои резюме на tsergey@brunelcr.ru

E-mail: tsergey@brunelcr.ru
Тема письма:

Требования:

• Английский язык - разговорный (письменный обязательно)
• Опыт работы в 1С (8.0), желательно опыт работы в SAP
• Знание Excel
• Опыт работы зарплатным бухгалтером (именно расчета заработной платы от 1 года)
• Высшее законченное профильное образование (бух.учет)

Условия:

• Оформление по ТК РФ
• Медицинская страховка
• Станция метро Юго-Западная

Обязанности:

• Ведение расчетов заработной платы;
• Расчет отпускных, больничных согласно действующему законодательству;
• Расчет начисления премий, алиментов, прочих выплат работникам;
• Подготовка и сдача отчетности в ИФНС и фонды.

Basic Functions
To prepare and modify instrumentation design drawings from Engineering Data, Design Data and Vendor Data
To prepare and modify electrical design drawings from Engineering Data, Design Data and Vendor Data
To provide drawings in compliance with design requirements
To provide CAD designer skills for the instrument and electrical group
Proficient in the understanding of and usage of Company and Client standards, procedures and practices
Proficient in the understanding, selection and application of instrument and electrical equipment in Hazardous Areas
To prepare Material Take-offs and Bills of Materials
To carry out document searches via LiveLink and Documentum
To assist in the preparation of Workpacks for construction purposes
To review Vendor drawings for correctness and compliance with design requirements
To assist in the compilation of Bill of Material’s, specifications in addition to creating & modifying drawings
To support the E/I offshore survey effort with occasional offshore survey trips if required

The candidate will be a keen learner will be motivated to improve self and to accept tuition from the senior E/I team members
The candidate will be able to operate as part of a small team, will demonstrate good safety awareness, will have an ‘Adequate’ command of the English language
The candidate will have a minimum of 3-5 years experience of an engineering design environment Experience with CAD packages esential.
Additional experience of a E/I construction environment would be an advantage as is any formal qualification in the oil & gas industry
Engineering diploma in electrical or instrumentation & controls is required
Minimum 2 yeas experience in oil & gas industry would be an advantage

E-mail: job-on-sakhalin@mail.ru
Тема письма:

Постоянная работа в Южно-Сахалинске, компания компенсирует переезд, проживание, дополнительные бонусы.

Требуется: мужчина, с опытом работы от 7 лет в ТБ, с опытом на нефтегазовых проектах (работа на сайте), навыки координирования российских подрядчиков, знания и навыки всех требвоаний по ОТ и ТБ, возможность систему безопасности на сайте с «нуля», знания международных стандартов безопасности, охраны труда и техники безопасности (желательно). Обязателен опыт расследования несчатсных случаев на сайте. Отличные менеджерские качества. Знание английского языка на хорошем уровне.

E-mail: job-on-sakhalin@mail.ru
Тема письма:

Accountability
To manage and engineer multi-discipline projects from front end, detail design, construction, commissioning, hand-over and close-out, within schedule and cost to an acceptable quality.

Basic Functions
Deliver Assigned projects within Budget and schedule
Provide clear direction to project team of expectations and delivery requirements

Principal Responsibilities
Single point responsible for the efficient execution of assigned projects to deliver within schedule, cost, HSE and at an acceptable quality
Develop scope of work handed over by the client for each assigned project to achieve the specified deliverables
Review and Approve cost and schedule estimates for assigned projects
Responsible for all project reporting and client interface management
Maintain and control project changes, utilising the change management protocols
Early highlight and resolution of all project issues associated with assigned projects

Specialist project skills
Shutdown / Package management
Communication skills to negotiate and be the primary interface with client

Excellent interpersonal skills
Good spoken and written English
Ability to work in a multicultural team
Liaise effectively between functions / disciplines and third parties
Demonstrate good safety awareness
Excellent Strategic Planning and Organising, Ability to Manage Change and motivate and develop teams
Excellent business commercial appreciation and judgement.
Skilled in conduction formal meetings, summarising and close-out pending issues.
PC Literate
Minimum 5 -7 years oil and gas engineering experience, of which 4 years within a design engineering environment

Shall have worked as a single-point responsible project engineer for several small/ medium sized oil/gas projects or managing multiple smaller projects concurrently. Shall have proven capabilities in managing and motivating all disciplines to deliver projects

Degree in discipline engineering or equivalent

E-mail: job-on-sakhalin@mail.ru
Тема письма:

Обязанности:

• Ведение российского бухгалтерского учета организации, формирование баланса;
• Формирование налоговой отчетности, расчет налога на прибыль;
• Формирование и сдача бухгалтерских и налоговых отчетов в налоговые, статистические органы;
• Сопровождение налоговых и аудиторских проверок.

Требования:

• Женщина до 50 лет
• Знание основных участков бухгалтерии, РСБУ
• Опыт работы в нефтегазовой отрасли от 5 лет.

Условия:

• Крупная западная нефтегазовая компания
• Офис – м. Юго-Западная
• Зарплата по итогам собеседования
• Медицинская страховка после испытательного срока
• Оформление по ТК
• Соц. пакет (оплата проезда и возмещение затрат на питание)
• Перспектива карьерного роста

Обязанности:

• Ведение всех участков бухгалтерии (банк, касса, налоги, основные средства, налоговая и бухгалтерская отчетность)
  
• Разработка учетной политики предприятия для целей бухгалтерского и налогового учета
• Составление бухгалтерской отчетности компании в соответствии с требованиями российских стандартов бухгалтерского учета
• Работа с аудиторскими компаниями, прохождение ежегодных аудиторских проверок.

Требования:

• Женщина до 50 лет
• Знание основных участков бухгалтерии, РСБУ
• Опыт работы в нефтегазовой отрасли‚ строительные услуги от 5 лет.

Условия:

• Крупная западная нефтегазовая компания
• Офис – м. Юго-Западная
• Медицинская страховка после испытательного срока
• Оформление по ТК
• Соц. пакет (оплата проезда и возмещение затрат на питание)
• Перспектива карьерного роста

During the project, the Job Holder has to:
• Participate, as part of the Project Quality Management System (QMS), in the development of site quality management system (e.g., plans, procedures and guidelines).
• Participate in review of key reference documentation for construction (e.g. Specifications) to verify compliance with the Project quality requirements.
• Supervise the activities of assigned personnel and Site Contractor. Perform supervisory functions and exercise technical & financial authority at the level established for the position.
• Manage the Site Quality Control Team, including the Welding Engineer, Insulating & Coating Engineer and remaining Inspectors and in particular, ensure, for any material or equipment to be incorporated into the Facilities, and for any work performed on Site, that:
• Quality assurance and control procedures are complied with,
• The Contractor’s Site quality assurance record books and all the related documentation are maintained and updated in conformity with contractual requirements and the Project quality assurance plan and procedures.
• Report on quality matters for Site processes and activities to the QA/QC Manager, liaise closely with the Site Management and maintain these fully abreast of any quality issues and areas of concern.
• Develop and maintain a Data Base for quality assurance and control activities at site. Develop and maintain Performance Indicators and prepare weekly and monthly reports, and write the corresponding narratives.
• Develop the program for Site quality assurance and controls of Contractor’s Works and coordinate its implementation.
• Ensure the Site Contractor (Suppliers and Sub-Contractors also) develop and implement QA/QC systems commensurate with the Contract requirements.
• Review critical documentation produced by Contractor (e.g., Inspection and Test Plans, Method Statements), and advise on “fitness for purpose” including Site Surveillance Schedule and/or compliance audits.
• Conduct visits, surveillance activities and/or audits at the Site Works as per schedule or, as and when required.
• Participate in the review of Site deviations related to quality issues and provide recommendations on the matter.
• Coordinate the review of Site Non-Conformance Reports, advise on corrective actions and maintain the Project Register.
• Monitor progress of the Site Contractor (and its Subcontractors) to make sure test packs are released on time and within the required priorities in respect of the Commissioning and Start Up schedule.
• Review final documentation produced by Contractor and advise accordingly.
• Support the Construction Team and propose alternative courses of action, wherever possible, to facilitate efficient project progress. Participate in regular meetings to keep abreast with all issues relating to the Project. Discuss and review opportunities for the optimization of assigned work programmes.

QUALIFICATIONS / EXPERIENCE REQUIRED
Basic Education: Graduate Engineer (B.Sc), preferable in Metallurgy & Materials Engineering,
with in-depth knowledge of Quality Management Systems (i.e., ISO 9001) and its synergies with
HSE Management Systems (i.e., ISO 1400 and OHSAS 1800) for medium/large construction
Programs.
Basic Trade Qualifications: 1) Welding: Senior Welding Inspector-CSWIP 3.2 [Preferable]; 2)
NDT: ASNT Level II for RT, UT, PT and DP[Preferable]; 3) Corrosion Protection: CSWIP Coating &
Painting Inspector [Preferable]; Auditing : IRCA Certified[Required].
Experience: At least 15 years proved experience in QA/QC aspects (engineering, procurement
and construction) with large oil and gas projects with minimum 10 years within the O&G
international construction environment. Experience of safety supervision in construction activities.
Familiar with Total Company rules & typical O&G codes & standards (e.g., BS, ASME, ANSI, API).
Has good communication, supervisory and team working skills with ability to establish
successfully bridges across cultures
Fluent in English (speaking and writing). Basic knowledge of Russian would be appreciated

Please send your CV at tsergey@brunelcr.ru

E-mail: tsergey@brunelcr.ru
Тема письма:

Work location: Moscow (Russia)

Position HSE specialist
Position time 1-1,5 years

Function
• Independent supervising, controlling and reporting on manufacturing site or on construction/commissioning location;
• Direct reporting to Head of Corporate Quality Management Department;
• All aspects of environmental protection issues incl.compiling, implementation and controlling of concepts and regulations (policies, guidelines, procedures) on subjects of occupational health and safety also in relation to other HSE functions (radiation protection, fire prevention);
• Maintenance and support of environmental management systems: Consultancy and support of key persons in the organization (management, physical doctor in the organization; Purchasing and Service units) - in line with specific laws and regulations;
• Coordination of activities of other persons in the field of environmental protection;
• Structuring and controlling of accident reporting incl. analysis of accident statistics with compiling of corrective actions;
• Recording and investigate of risk conditions and elaborate of suggestions for risk reduction, especially improving of safety guidelines and support in compiling of rules, regulations, working procedures and directives;
• Participation in/or implementation of environmental protection audits; planning and execution of EHS audits and inspections;
• Contact to supervising organisations and control authorities;
• Consultancy and training of employees in subjects of occupational health and safety and accident prevention.

Requirements
• Higher education / university degree.
• EHS Management;
• Crisis and Risk Management;
• EHS: legal requirements/standards, guidelines and tools;
• International standards for projects (OSHA, IOSH, NIOSH);
• HSE-standards: ISO 14001 et sqq., ISO 18001, SCC;
• Quality Management, incl. Analysis / Statistics (6 Sigma);
• Advanced level of English or German language is required.
• 2-3 years of professional experience in mechanical/electronical/construction engineering; environmental technology, chemistry.
• Experience in project realization on site;
• Leadership experience;
• Experience on commissioning/construction sites in different foreign countries/regions; experience in working with international partners and customers;
• Experience in quality management is desirable.

E-mail: evgeniya.maklaeva@sgs.com
Тема письма:

Work location: Moscow (Russia)

Position
Mechanical Engineer

Function
• Overall technical integrity of mechanical design premises, design, structural and flow assurance behavior.
• Designing premises definition of onshore mechanical systems (both static and rotating items)
• Defining and specifying geotechnical and geophysical surveys
• Defining piping routing
• Internal design and subcontracted design supervision
• Material selection and specification
• ITT preparation and bid technical evaluation
• Planning, review and follow-up of piping material purchasing, construction and commissioning
• Flow assurance follow-up from design to start-up
• Estimating mechanical items cost and schedule

Requirements
• Degree or Technical Diploma
• Good knowledge of spoken and written English
• 7 years of Oil & Gas Industry experience
• 5 years of control system experience
• Internal Standard, Suppliers qualification methodology and techniques, Feed-back development and diffusion, Technical audit and Design Review, Work team management methodology, Site Materials and equipment organization, Project Procurement Management
• Contracting Strategy, Contract Management
• Standard ISO, TQM and Quality system, Technical requirement and Standard
• Local/National and International Standard and Codes, Health, Safety, Environment, Quality, Tender procedure
• Mechanical Design, Piping Design
• Inspection, Installation, Offshore Installation Supervision, Control system knowledge, Inspection, control and testing techniques
• Prep. of Devel. Program & Budget, Data Books, Oper. & Decom. Manual, Close-Out Report Preparation
• Required personal capabilities
• Problem Solving
• Flexibility
• Excellence orientation
• Communication
• Listening and reception
• Negotiation
• Relations management

E-mail: evgeniya.maklaeva@sgs.com
Тема письма:

Work location: Moscow (Russia)

Position
Instrumentation and Control Engineer

Function
• Selection of the best technical/economical solutions and products for instrumentation and automation systems
• Instrumentation and automation systems overall design integrity and compliance with international standards, company guidelines and engineering best practices
• Instrumentation and automation and control systems concept design and/or detailed engineering design
• Preparation of ITT documentation and bid technical review for instrumentation and automation
• Review of contractors instrumentation and automation and control systems design
• Technical instrumentation and automation support to commissioning an production start-up

Requirements
• Engineering degree (preferably Electronic engineering) or Technical Diploma
• Good in spoken and written English
• 7 years of Oil & Gas Industry experience
• 5 years of instrumentation and automation experience
• IT Hardware Architecture (Generic)
• Engineering knowledge in the specialist activity
• Company / Corporate organization, Internal Standard, Feed-back development and diffusion, Site Management
• Technical requirement and Standard
• Local/National and International Standard and Codes, Tender procedure
• Electric.& Instrument.& Telecom Design
• Plant construction, Control system knowledge, Inspection, control and testing techniques
• Life cycle design
• Oil and Gas process treatment, Process optimization/simulation SW-program
• Risk Management
• Required personal capabilities
• Problem Solving
• Flexibility
• Excellence orientation
• Communication
• Listening and reception
• Negotiation
• Relations management

E-mail: evgeniya.maklaeva@sgs.com
Тема письма:

Job Purpose: To develop well design and layout optimizing the investments and applying the highest standards of engineering integrity, safety and environmental protection. To draft drilling plan and support its execution providing engineering advise, and updating, when necessary, well design and execution plans.

ROLE DEFINITION:
Main responsibilities:
- Overall technical integrity of well design and execution plan
- Cost effectiveness of well design and drilling program

Key activities:
- Planning and engineering drilling operations in order to achieve technical objectives in safe, efficient and cost effective manner
- Preparing drilling programs including all information as specified in Company procedure
- Preparing estimated cost breakdown of wells to be drilled or worked over
- Operations follow-up
- Recommending changes in some aspects of drilling program (if necessary) to improve drilling and completion methods, techniques and speed.
- Making recommendations when drilling problem occurs
- Tracking and benchmarking drilling performance and costs
- Preparing post well reports
- Carrying out special studies and reports on any aspects of drilling and completion operations as required.
- Providing digital data useful to follow up well operations and produce well profile print-outs and overpressure study. To critically study these data, detect anomalies and propose corrective actions if needed.
- Assisting rigsite operations for specific jobs
- Assisting in the preparation and evaluation of tenders

QUALIFICATIONS
Education - Engineering degree or high school diploma
Training and Courses:
- Basic Oil
- Drilling & completion course
- Drilling & completion engineering course
- Geology & Geophysics basic course (preferred)
- Subsurface & Reservoir basic course (preferred)

Languages - Fluent knowledge of English

EXPERIENCE & COMPETENCIES:
Required Experience: -7/8 years of Oil & Gas Industry experience - 5 years of drilling engineering experience]

Required knowledge, technical or professional skills:
- Drilling Activities: Drilling Operation, Mud Line Suspension, Horizontal Drlg, Dril.Fluids&Cement&Cem.Op.Design/Operat., Well drilling experience
- Advanced Drilling: Lean Profile, Underbalance Drilling, Coil Tubing Drilling
- High Profile Drilling: Extended Reach Drilling, Hp/Ht Drilling, Simultaneous Drilling, Wellbore Stability/Sand Production/Prediction&Control

E-mail: tsergey@brunelcr.ru
Тема письма:

Responsibilities:
• Supervise and coordinate the TEO/STU project Contractors and Sub-Contractors for all fields of Process activities. Monitor the progress of the related discipline Engineering Design activities performed by the Contractor’s and comment/approve the progress figures and supporting documents.
• Check and review the engineering documents developed by the Contractors, Sub-Contractors and timely give comments and/or approval, in accordance with the Project procedures and requirements.
• Ensure that Project design specifications and standards are applied, within defined RF norms to be used and the applied STU’s. Ensure STU’s developed are in line with COMPANY intentions and FEED Engineering, comment and review STU contractor documents liaising as required with Lead Discipline Engineer.
• Ensure the Contractors’ and Sub-Contractors resources and organization are adequate (and competent) for achieving the discipline engineering works
• Assist commissioning and start up team when in Detailed engineering and start up phase.

Requirements:
• Experience in Project Scientific Institutes (Russia)
• Graduated Engineer with 7 - 15 years experience in process engineering and operation related to large LNG and/or oil and gas project
• Concept design / FEED stages of projects in the Oil & Gas industry
• Skills in terms of LNG related Engineering Design areas appreciated
• Russian regulation/norms and TEO project development knowledge mandatory
• Knowledge of international standards/norms, industrial and technical constraints is required
• Languages: Russian, English fluent (demonstrated abilities for reading, writing and speaking)

Office in Saint-Petersburg, then depending on Detailed Engineering location and confirmation post year 2010.
Preferable St. Petersburg citizens or candidates from other regions who will be available on relocation without compensation only for salary.

E-mail: tsergey@brunelcr.ru
Тема письма:

Обязанности:
• Контроль бюджетом проекта, отчетность по реализации инвестиционных проектов
• Разработка различных проектов по оптимизации процесса эксплуатации месторождений
• Формирование и мониторинг графика реализации проекта и его затрат, стоимостных характеристик.
• Выбор проектных решений в рамках утвержденного финансирования. Оценка и управления рисками
• Выбор и реализация оперативных и долгосрочных мер для оптимизации режимов работы объектов
• Пуск объектов в эксплуатацию
• Разработка технологических схем по эксплуатации месторождений.
• Отслеживание всего технологического процесса: Бурение, добыча, разработка месторождений

Требования:
• Высшее техническое образование, специальная подготовка в области управления нефтегазовыми проектами.
• Соответствующий опыт на руководящих должностях в нефтяных компаниях от 5 – 7 лет, а также опыт на инженерных позициях по эксплуатации месторождений.
Локация в Москве.

E-mail: tsergey@brunelcr.ru
Тема письма:

Requirements:
Under the direction of the Lead Piping Engineer, the Piping Stress Engineer shall:

- Have at least 10 years industry experience
- Be able to determine criticality factors for analysis based on the project Basis of Design.
- Develop the critical line list and stress analysis working procedures
- During early phases of project execution the Stress Engineer shall provide technical assistance to the Designers in the shaping of geometric piping configurations.
- Knowledge of proprietary software required. Preference is with Caesar II
- Prioritisation of work shall be consistent to direction provided by the Lead Piping Engineer.
- Planning of analytical work.
- Accountable for man-hours.
- Be able to work with RDI directly, supervising where required and checking their results to ensure project compliance.
- Experience in co-ordination / review / progress reporting of deliverables.
- Will have Russian construction experience.
- Advantage to have piping design experience outside of Russia
- Will likely have been a stress piping engineer on a previous significant project
- Will need to have prior work experience of working with RDI's on FEED and TEOC work
- Good English; written and spoken
- Knowledge of Russian and international standards and codes
- Will have worked with and in International companies
- Willing to work in Moscow and Samara locations.
- Some travel to Irkutsk
- After 3 months the work will be in Moscow and another 9 (or more) months the work will be fulfilled in Samara or other region.

Please send your CV at tsergey@brunelcr.ru

E-mail: tsergey@brunelcr.ru
Тема письма:

Requirements:
- Typically minimum of 7 / 10 years experience
- Person preferable to have knowledge of INTOOLS software tool.
- Knowledge of preparation of Instrument Philosophies and Engineering Design Specifications.
- Knowledge of foreign and local Russian instrument vendors.
- Will need to be able to co-ordinate with RDI's with FEED and TEOC work
- Good English; written and spoken
- Knowledge of Russian Codes and Standards is essential and knowledge of International codes and standards is preferable.
- Worked with and in International companies a major advantage.
- Willing to work in Moscow and Samara locations.
- Some travel to Irkutsk.
- After 3 months the work will be in Moscow and another 9 (or more) months the work will be fulfilled in Samara or other region.

Please send your CV at tsergey@brunelcr.ru

E-mail: tsergey@brunelcr.ru
Тема письма:

Условия:
Работа в Москве
Высокая официальная заработная плата (от 80000net)
100% соблюдение ТК РФ
регулярные премии по результатам работы
медицинская страховка

E-mail: info@personalcom.ru
Тема письма:

1. Commissioning Process Supervisor (with experience in the sector of rafining: VACUUM DISTILLATION UNIT and particularly in HYDROCRACKER UNIT). Besides experience in the technics to preparation to start up and managing of plants, it is required a good availability to managing of personnel.
English or French is required.
Начальник смены цеха гидрокрекинга нефти. 3 чел.

2. Commissioning Process Panel Operator (with experience in the sector of rafining: VACUUM DISTILLATION UNIT and particularly in HYDROCRACKER UNIT). It is required technical knowledge to preparation to the start up and managing of plants, operative knowledge of DCS Centum YOKOGAWA (if possible).
English or French is required.
Оператор распределительного щита.3 чел.

3. Commissioning Process Field Operator (with experience in the sector of rafining: VACUUM DISTILLATION UNIT and particularly in HYDROCRACKER UNIT). It is required technical knowledge to preparation to the start up and managing of plants, (washing and flushing of lines, inspection to the equipments etc.) and managing of plants (start up and managing of centrifugal compressors and alternatives, Pumps Barrel, etc.).
English or French is required.
Руководитель бригады наружного контроля. 3 чел.

E-mail: strel2604@mail.ru
Тема письма:

Requirements:
- Higher education
- PC skills
- Fluent English

Rotation 28 / 28 days
High Salary.

E-mail: pavel@brunelcr.ru
Тема письма:

Requirements:
- Typically minimum of 7 / 10 years experience
- Person preferable to have knowledge of INTOOLS software tool.
- Knowledge of preparation of Instrument Philosophies and Engineering Design Specifications.
- Knowledge of foreign and local Russian instrument vendors.
- Will need to be able to co-ordinate with RDI's with FEED and TEOC work
- Good English; written and spoken
- Knowledge of Russian Codes and Standards is essential and knowledge of International codes and standards is preferable.
- Worked with and in International companies a major advantage.
- Willing to work in Moscow and Samara locations.
- Some travel to Irkutsk.
- After 3 months the work will be in Moscow and another 9 (or more) months the work will be fulfilled in Samara or other region.

Please send your CV at tsergey@brunelcr.ru

E-mail: tsergey@brunelcr.ru
Тема письма:

Requirements:
- At least 7 years experience in analysis and design of steel process and pipe rack structures for oil and gas industry.
- Preferred - At least one year working knowledge of foundations/piling in permafrost conditions.
Knowledge of 3D Structural software analysis software - preferably STAAD.
- Knowledge of local building requirements/materials.
- Knowledge of steel pre-assembly/modularization concepts.
- Experience in co-ordination / review / progress reporting of deliverables.
- Will need to have prior work experience in co-ordination with RDI's on FEED and TEOC work.
- Good English; written and spoken.
- Knowledge of Russian and international standards and codes.
- Worked with and in International companies.
- Willing to work in Moscow and Samara locations.
- Some travel to Irkutsk
- After 3 months the work will be in Moscow and another 9 (or more) months the work will be fulfilled in Samara or other region.

Please send your CV at tsergey@brunelcr.ru

E-mail: tsergey@brunelcr.ru
Тема письма:

Requirements:
Under the direction of the Lead Piping Engineer, the Piping Stress Engineer shall:

- Have at least 10 years industry experience
- Be able to determine criticality factors for analysis based on the project Basis of Design.
- Develop the critical line list and stress analysis working procedures
- During early phases of project execution the Stress Engineer shall provide technical assistance to the Designers in the shaping of geometric piping configurations.
- Knowledge of proprietary software required. Preference is with Caesar II
- Prioritisation of work shall be consistent to direction provided by the Lead Piping Engineer.
- Planning of analytical work.
- Accountable for man-hours.
- Be able to work with RDI directly, supervising where required and checking their results to ensure project compliance.
- Experience in co-ordination / review / progress reporting of deliverables.
- Will have Russian construction experience.
- Advantage to have piping design experience outside of Russia
- Will likely have been a stress piping engineer on a previous significant project
- Will need to have prior work experience of working with RDI's on FEED and TEOC work
- Good English; written and spoken
- Knowledge of Russian and international standards and codes
- Will have worked with and in International companies
- Willing to work in Moscow and Samara locations.
- Some travel to Irkutsk
- After 3 months the work will be in Moscow and another 9 (or more) months the work will be fulfilled in Samara or other region.

Please send your CV at tsergey@brunelcr.ru

E-mail: tsergey@brunelcr.ru
Тема письма:

Обязанности:
o Координация деятельности проектов компании (добыча газа) в России и зарубежом.
o Выполнение основных плановых проектных работ для прохождения этапов оценки и выбора, координация деятельности работы добывающей компании, по бурению, инжинирингу и обустройству.
o Контроль за выполнением и реализацией проекта.
o Разработка стратегии добычи, обустройства, эксплуатации, проектирования месторождений и проведения тендеров.
o Управление процессами проведения тендеров и подготовки/реализации контрактов.
o Анализ производственных возможностей подрядных организаций. Руководство и управление добывающей единицой.

Требования:
• Высшее техническое образование, специальная подготовка в области управления нефтегазовыми проектами.
• Опыт руководства в российских и международных добывающих компаний от 5 лет .
• Опыт работы не менее 10 лет в области добычи, проектирования и обустройства крупных месторождений газа.
Локация в Москве.

Контактное лицо:
Сергей, (495) 783-66-77, tsergey@brunelcr.ru

E-mail: tsergey@brunelcr.ru
Тема письма:

Обязанности:
• Контроль бюджетом проекта, отчетность по реализации инвестиционных проектов
• Разработка различных проектов по оптимизации процесса эксплуатации месторождений
• Формирование и мониторинг графика реализации проекта и его затрат, стоимостных характеристик.
• Выбор проектных решений в рамках утвержденного финансирования. Оценка и управления рисками
• Выбор и реализация оперативных и долгосрочных мер для оптимизации режимов работы объектов
• Пуск объектов в эксплуатацию
• Разработка технологических схем по эксплуатации месторождений.
• Отслеживание всего технологического процесса: Бурение, добыча, разработка месторождений

Требования:
• Высшее техническое образование, специальная подготовка в области управления нефтегазовыми проектами.
• Соответствующий опыт на руководящих должностях в нефтяных компаниях от 5 – 7 лет, а также опыт на инженерных позициях по эксплуатации месторождений.
Работа в Москве.

E-mail: tsergey@brunelcr.ru
Тема письма:

Основные обязанности:
• Проведение инженерной экспертизы в отношении коррозии и материалов для подразделений компании (инженерных, производственных, обслуживающих).
• Разработка и внедрение эффективных поправок и технических приемов с целью контроля коррозии эксплуатируемого оборудования в пределах допустимых стандартов.
• Оценка эффективности альтернативных антикоррозийных химических обработок и антикоррозийных веществ.
• Участие в реализации долгосрочных проектов, связанных с материалами, предотвращением коррозии.

Основные требования:
• Законченное высшее или среднее техническое образование (предпочтительно, в области электрохимии, химии, металлургии и материаловедении, механике).
• Опыт работы не менее 5 лет в сфере антикоррозийной обработки и контроля качества материалов.
• Опыт в оценке рисков и методах устранения коррозии.
• Свободное владение английским языком (разговорный и письменный).
• Готовность к вахтовому методу работы (28/28 дней).

Компания предлагает:
Высокий уровень заработной платы; полный социальный пакет, включающий полис ДМС. Компания компенсирует расходы на проживание и питание во время рабочей вахты. Работа в соответствии с Трудовым кодексом РФ.

Отправляйте свои резюме на tsergey@brunelcr.ru

E-mail: tsergey@brunelcr.ru
Тема письма: