Работа в нефтяной и газовой отрасли
OilCareer.Ru Работа и карьера в нефтегазовой отрасли

Seismic Data Quality Control Supervisor

Архивная вакансия от 02.12.2013



Направления деятельности:

Геология и геофизика

Регионы работы:

Вахтовый метод


Anotech ENERGY is an engineering consulting company with more than 550 employees, specialized in the field of oil and gas. We are the partner of major players in the oil and gas industry and energy sector. Anotech ENERGY is a subsidiary that belongs to Alten S.A which is a French Engineering consulting group that counts over 15 000 employees in 18 countries.

This position is based in Russia. The Seismic Data Quality Control Supervisor will be involved in a major Oil & Gas operator’s project.

• Ensure the compliance of the contract signed
• Review periodic instrument tests (daily and monthly), to ensure that the recording system is functioning to the manufacturer’s specifications. Monitor geophone and cable tests to ensure that they meet contractual standards and that a rotational schedule of maintenance is being observed. Keep records of all QC data.
• Ensure that all field data acquisition parameters are strictly adhered to and checkobserver’s reports for accuracy and legibility.
• Monitor survey methods to ensure that line positioning is within required accuracies and in agreement with programmed pre-plot locations.
• Ensure that receiver arrays are accurately laid out and geophones are firmly planted and well buried.
• Ensure that Upholes, WRS, LVL… are registered according to company specifications.
• Review daily and periodic vibrator and Impulse source tests and ensure that each unit is operating within contractual standards.
• Monitor line clearance work to ensure that all crew personnel have safe access to the seismic lines and that acceptable clearance lead is maintained.
• Check method of computation of static corrections if applicable and accuracy of derived values.
• Verify the integrity of the seismic/positioning data merge.
• Review processing flows used on in-field data processing system to ensure that optimum quality seismic sections are being produced in a timely fashion for QC purposes.
• Advise Company of any infractions of safety standards and assist (if required) in investigation of any accident or near-miss.
• Participate in periodic safety meetings with Seismic Contractor’s personnel.
• Ensure that all working practices are environmentally acceptable.
• Maintain a log of all data shipments, particularly magnetic tapes, and advise Company of any delays in the dispatch of material which may adversely affect the processing of the data.
• Keep records of the consumption of all reimbursable materials such that Seismic Contractor’s invoices can be verified.
• Review and certify amount of data acquired for the period to be invoiced.
• Ensure that all compensation/damages claims are settled fairly and promptly and in accordance with rates approved by local government authorities.
• Regularly discuss with Seismic Contractor’s management methods of improving the efficiency of the seismic survey and of reducing costs where possible.
• Maintain detailed records of all production figures from the seismic crew and agree these daily with the Party Manager such that they can be reconciled against Seismic Contractor’s monthly invoices.
• Review and authorize for payment copies of all Seismic Contractor’s invoices for the project.
• Submit regular progress reports to Company detailing work completed, work in progress and project costs to date. Keep Company advised of any potential cost over-run or delay in project completion.
• Submit daily progress report to Company Project Manager detailing work completed, work in progress and project costs to date. Keep Company advised of any potential cost over-run or delay in project completion.
• Submit a comprehensive and fully documented independent report on Seismic Contractor’s performance on completion of project. The report should mention quality control procedures, techniques used to improve data quality or production rates and problems encountered which prevented any of the survey’s objectives from being realized and should be supported by photographs. Recommendations for future work must be included. Internal report must be fulfilled every day.
• Ensure all field and necessary support data is delivered to the processing centre as stated in the contract
• The Project Coordinator shall be the focal point for the QC team’s communication with the Company.
• Seismic QC will be the leader of the QC Team (Technical-QC, HSE-QC) and the only communication channel between Contractors and Company.

Context and environment:

• Rotation

Qualifications and Experience required:

• Graduate engineer with minimum 15 years experience in geophysical operations.Geophysicist or equivalent qualifications.
• HSE Knowledge (Demonstrable)
• Strong Knowledge of seismic data processing, with knowledge of working in frozen environments and using both Vibroseis and Impulse sources
• Fluent in English (speaking and writing)
• Fluent Russian is mandatory.
• Good communication skills, able to work in a multicultural environment.

E-mail: n.prokhorova@anotech.fr

Тема письма:

№ вакансии: 24756

Контакты рекрутера Все вакансии компании Просмотров: 1291
Оцените вакансию 0 из 5 0 1291
рейтинг голосов просмотров


Напомнить пароль · Регистрация
Сейчас на сайте:   
Онлайн всего: 21
Гостей: 20
Пользователей: 1

Следуйте за нами:   Нефтяники,   ВКонтакте,   Одноклассники,   Мой Мир,   Facebook,   Google+,   YouTube,   Twitter,   Instagram,   LinkedIn,   LiveJournal,   Uid.Me
Защита персональных данных
OilCareer © 2006-2016